000 01952nam a2200253 a 4500
001 vtls000058128
003 KUKTEM
005 20251114204509.0
008 120104t2010 my a f m 000 0 eng d
020 _aTHE0004164(Local)
039 9 _a201905141714
_bfarhana
_y201201041237
_zida
040 _aUMP
090 _aTP156.F6 T46 2010 rs Bc.
100 1 _aThong, Li Mun
245 1 0 _aInvestigation of turbulence slapping technique effect on the flow behavior in pipelines /
_cThong Li Mun
260 _aKuantan, Pahang :
_bUMP,
_c2010
300 _axv, 65 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper (Bachelor of Chemical Engineering (Gas Technology)) -- Universiti Malaysia Pahang - 2010
504 _aBibliography : p. 45-47
520 3 _aCost is a very famous topic that always is the most significant factor to be concern in order to build up a piping system. Pumping power needed to pump fluid along the pipelines is increase to overcome the pressure drop of the fluid inside the pipeline. In this investigation, a fins is introduce to overcome the pumping power loses and increase the percentage of drag reduction (DR%). This investigation had undergo with a liquid circulation system where a smooth PVC pipe with 0.00381m I.D to rough galvanized iron with 5 pressure sensor which located 0.5m distance each pressure sensor. Fins model is an object where a stainless steel ring connected with 4 chains with few plastic plates. It is installing inside the 0.00381m I.D PVC pipe. The experiment was run for 2 minutes at several fluid velocities. The highest Dr% from the experiment is 78.51%. The investigation had successful to prove the blending fins are high potential to replace chemical drag reducer in pipelines to reduce pumping power losses.
650 0 _aMultiphase flow
650 0 _aFluid dynamics
999 _aVIRTUA40
_c3039
_d3045
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992