000			02045nam a2200265 a 4500
001			vtls000063618
003			KUKTEM
005			20251114204519.0
008			120906t2012 my a f m 000 0 eng d
020			_aTHE0005574(Local)
039		9	_a201905161733 _bhanafiah _y201209061251 _zida
040			_aUMP
090			_aTA166 .F35 2012 rs Dip.
100	0		_aFaiz Aswad Ayop Azmi
245	1	0	_aDesign and analysis of wheelchair for usage of handicap people / _cFaiz Aswad Ayop Azmi
260			_aKuantan, Pahang : _bUMP, _c2012
300			_axi, 54 p. : _bill. ; _c30 cm. + _e1 CD-ROM
502			_aProject paper (Diploma in Mechanical Engineering) -- Universiti Malaysia Pahang - 2012
504			_aBibliography : p. 30
520	3		_aThis thesis discussed the design and analysis of wheelchair for usage of handicap people. The objectives of this thesis are to design the foldable wheelchair that can be move almost all type of surfaces and to analyze the chassis of the wheelchair. Firstly, this thesis discussed about the present market concept and materials that used for wheelchair. Later, three design concepts are suggested and the concept selection using concept screening and scoring is made. The design using Solidwork software in part by part of the wheelchair is modelled. The finite element analysis is performed by Algor software. This design analysis focused on two types of chassis materials, which are aluminium alloy and stainless steel. The maximum force of 2000N was applied to chassis model. The analysis of displacement distribution, the strain and stress contour later is discussed. The result shows that stainless steel is the best material to used for chassis of wheelchair because low in displacement distribution and stress contour compared to aluminium alloy.
650		0	_aHuman engineering
650		0	_aWheelchair _xDesign
650		0	_aEngineering design
999			_aVIRTUA40 _c3349 _d3355
999			_aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*6502*9992