000			01789nam a2200265 a 4500
001			vtls000067147
003			KUKTEM
005			20251114204521.0
008			121129t2012 my da f m 000 0 eng d
020			_aTHE0007627(Local)
039		9	_a201905171155 _bfawwaz _c201212040938 _dida _y201211291004 _zhuda
040			_aUMP
090			_aTS171.4 .Z87 2012 rs Bc.
100	0		_aNik Zuraida Imran Adly
245	1	0	_aHoneycomb ribs design on overcoming part warping / _cNik Zuraida Imran Adly
260			_aKuantan, Pahang : _bUMP, _c2012
300			_axv, 94 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM
502			_aProject paper (Bachelor of Manufacturing Engineering) -- Universiti Malaysia Pahang - 2012
504			_aBibliography : p. 82
520	3		_aThin walled plastic parts are subjected to warpage after injection. Warpage can be overcome by designing ribs. This experimental project is to design a suitable honeycomb ribs replacing the normal ribs to overcome part warping. The parameters included honeycomb ribs height, honeycomb ribs thickness and the honeycomb size. Finite Element Analysis (FEA) simulations for each honeycomb ribs design are analyzed with Autodesk Moldflow Insight software and the part which result the worst warping value, part with medium warping value and part with less warping value were chosen to validate them by fabricating the core and cavity inserts to produce the actual product. The part warping is measured and then compared with the data from the simulation. Thus, the best design parameters of honeycomb ribs are identified.
650		0	_aProduction engineering
650		0	_aDesign, Industrial
650		0	_aPlastics _xMolding
999			_aVIRTUA40 _c3387 _d3393
999			_aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*6502*9992