| 000 | 01636nam a2200253 a 4500 | ||
|---|---|---|---|
| 001 | vtls000065384 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204521.0 | ||
| 008 | 121023t2012 my da f m 000 0 eng d | ||
| 020 | _aTHE0006594(Local) | ||
| 039 | 9 |
_a201905161046 _bamirul _c201211081443 _dhuda _c201211071302 _dhuda _y201210231221 _zhuda |
|
| 040 | _aUMP | ||
| 090 | _aTJ1191 .S53 2012 rs Bc. | ||
| 100 | 0 | _aAhmad Shahrul Amrie Mohd Supri | |
| 245 | 1 | 4 |
_aThe study on the effect of laser power on kerf width for carbon dioxide laser cutting process / _cAhmad Shahrul Amrie Mohd Supri |
| 260 |
_aKuantan, Pahang : _bUMP , _c2012 |
||
| 300 |
_axiv, 51 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM |
||
| 502 | _aProject paper (Bachelor of Manufacturing Enginnering) -- Universiti Malaysia Pahang - 2012 | ||
| 504 | _aBibliography : p. 45-49 | ||
| 520 | _aThis study focuses on the effect of laser power on kerf width using CO2 laser machine. The experiment was conducted by using laser cutting process on 2.5 mm thick of acrylic sheet. The laser cutting parameters considered include laser power and cutting speed. The good cut quality for laser cutting process has a uniform with smaller kerf width. The effect of the laser cutting parameter on the cut quality was further investigated by monitoring the kerf width using image analyzer. After performed the experiment and analysis it shows that the lower laser power and higher cutting speed produce narrower kerf width. | ||
| 650 | 0 | _aLaser beam cutting | |
| 650 | 0 | _aCarbon dioxide lasers | |
| 999 |
_aVIRTUA40 _c3401 _d3407 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992 | ||