| 000 | 02381nam a2200241 a 4500 | ||
|---|---|---|---|
| 001 | vtls000067920 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204523.0 | ||
| 008 | 121221t2012 my a f m 000 0 eng d | ||
| 020 | _aTHE0003803(Local) | ||
| 039 | 9 |
_a201905151510 _bshah _c201212211135 _dFida _y201212211134 _zFida |
|
| 040 | _aUMP | ||
| 090 | _aTP156.A35 A379 2012 rs Bc. | ||
| 100 | 0 | _aSiti Aisyah Radhiah Mohamed @ Ayub | |
| 245 | 1 | 0 |
_aAdsorption of methylene blue by using activated carbon from empty fruit bunch and palm press fiber / _cSiti Aisyah Radhiah Mohamed @ Ayub |
| 260 |
_aKuantan, Pahang : _bUMP, _c2012 |
||
| 300 |
_axv, 51 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM |
||
| 502 | _aProject paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang - 2012 | ||
| 504 | _aBibliography : p. 43-44 | ||
| 520 | 3 | _aEmpty Fruit Bunch (EFB) and Palm Press Fiber (PPF) are abundance of agricultural wastes. These fiber are basically incinerated and used in mulching purposes. Adsorption of methylene blue by using both of fiber is one way to increase the uses of them. Methylene blue is one of dyestuff that harmful to human and aquatic life. Effect of contact time, agitation speed and dosage of activated carbon is investigated. Activation the activated carbon using impregnated of KOH solution is used. Same ratio of fiber which is (1:1) (wt %) is prepared. The higher the contact time, the higher the amount of adsorption capacity obtained. At certain time there got the lower number of adsorption capacity because the contact time taken is not sufficient since the process of adsorption taking a long time to achieve the equilibrium. In term of agitation speed, 170 rpm of speed gave the highest adsorption capacity compared to 200 rpm and 700 rpm. According to Langmuir isotherm model, it is showed that 170 rpm gave 5.025 mg/g of adsorption capacity. It is because the Van der Waals forces are weak to bind the molecules. So, the molecules that already attracted to the molecules surface are desorbed back if the agitation speed too high. For dosage impact, the adsorption capacity decreased sharply with the increasing of adsorbent dosage because of the overlapping of adsorption site that cause the overcrowding of adsorbent particles. | |
| 650 | 0 | _aAdsorption | |
| 999 |
_aVIRTUA40 _c3439 _d3445 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*9992 | ||