000			02165nam a2200253 a 4500
001			vtls000065222
003			KUKTEM
005			20251114204527.0
008			121019t2012 my da f m 000 0 eng d
020			_aTHE0005950(Local)
039		9	_a201905141520 _baida _c201211071230 _dhuda _c201211071228 _dhuda _y201210191708 _zhuda
040			_aUMP
090			_aTA668 .A45 2012 rs Bc.
100	0		_aMohd Ali Amri Muhammad Hassan
245	1	0	_aMechanical properties of the acrylonitrile- butadienne- styrene (abs) – mixed recycled abs / _cMohd Ali Amri Muhammad Hassan
260			_aKuantan, Pahang : _bUMP, _c2012
300			_axiii, 48 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM
502			_aProject Paper (Bachelor of Manufacturing Engineering) -- Universiti Malaysia Pahang - 2012
504			_aBibliography : p. 41-42
520			_aToday, plastics are widely used in daily work, because the plastic easy to set up and easy and light to operate. Plastic is also considered a substitute for small items that had been using iron as a material substance. The problem happen when there produce a lot of product to be supplied to the industry. The problems occur when there is a defect in the product or the product does not meet the requirement of customers. The product were rejected and left behind as a waste. The product still can reuse and can be recycled. The objective for this project is to study the mechanical properties of the recycled ABS – mixed- recycled ABS. The ABS was crushed into pallet form to get the recycled material. The recycled material was combined with virgin material. Five samples were needed to make this project. This project was followed an ASTM D638 as a standard .Tests included the tensile stress to determine the strength of the product. After performing the tensile test, the results show that there is resistance on the product that content of 70% Abs and 30% recycled is considered as a percentage of the best in term of tensile strength.
650		0	_aPlastic analysis (Engineering)
650		0	_aStructural design
999			_aVIRTUA40 _c3564 _d3570
999			_aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992