000			02686nam a2200265 a 4500
001			vtls000066609
003			KUKTEM
005			20251114204528.0
008			121120t2012 my da f m 000 0 eng d
020			_aTHE0007609(Local)
039		9	_a201905171133 _bfawwaz _c201212050952 _dhuda _c201211201012 _dhuda _y201211201011 _zhuda
040			_aUMP
090			_aTS171.4 .S24 2012 rs Bc.
100	0		_aMohd Saffririzal Abdul Halim
245	1	3	_aAn integrated type of MIG torch cleaner / _cMohd Saffririzal Abdul Halim
260			_aKuantan, Pahang : _bUMP, _c2012
300			_axiv, 86 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM
502			_aProject paper (Bachelor of Manufacturing Engineering) -- Universiti Malaysia Pahang - 2012
504			_aBibliography : p. 60-62
520	3		_aThis thesis deals with the designing and development of MIG weld torch cleaner that efficient and effective clean in order to protect the torch from corroded during the cleaning process. The objectives of this thesis are to develop a torch cleaner that can clear and retards buildup of spatter in welding torch. The purpose for this study is to maintain quality in your MIG welding cell by removing spatter build-up in the nozzle. The scope of this project is that the validation of the torch cleaner through analysis software is considered precise. The design will justify the ergonomics principle and the finite element analysis was performed. The finite element model of design was analyzed using Static Stress with Linear Material Models. Three designs of torch cleaner were constructed. For the reamer blade, the analysis of strength of material is used in for the construction. For the each component of MIG torch cleaner, the analysis of different forces had been applied. The forces that being applied shown that the ability of the torch cleaner to support the force. The result shows that the design A has lower Stress von Misses than design B and design C. From the result, it is observed that the design is success and achieved to produce the special tool without using any power sources. An analysis of this product is achieved with comparing the three designs. The design A has meets all the criteria and specification that needed in this project. Lastly, the result of the testing and fabrication is overall succeeding in order to protect the torch from corroded during the cleaning process at the same time meets with the entire objective in this project.
650		0	_aProduction engineering
650		0	_aNew products
650		0	_aMachine-tools _xDesign and construction
999			_aVIRTUA40 _c3594 _d3600
999			_aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*6502*9992