| 000 | 02302nam a2200265 a 4500 | ||
|---|---|---|---|
| 001 | vtls000052008 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204337.0 | ||
| 008 | 110315t2010 my a f m 000 0 eng d | ||
| 020 | _aTHE0006383(Local) | ||
| 039 | 9 |
_a201905131429 _bamirul _c201110041144 _dFida _c201107131636 _dVLOAD _c201103151558 _dida _y201103151555 _zida |
|
| 040 | _aUMP | ||
| 090 | _aTJ799 .A45 2010 rs Bc. | ||
| 100 | 0 | _aMohammad Amin Mohamed | |
| 245 | 1 | 0 |
_aIntake and exhaust ports flow investigation of 4-stroke SI engine / _cMohammad Amin Mohamed |
| 246 | 3 |
_aIntake and exhaust ports flow investigation of 4-stroke SI engine _h[computer file] |
|
| 260 |
_aKuantan, Pahang : _bUMP, _c2010 |
||
| 300 |
_axii, 64 p. : _bill. (some col.) ; _c30 cm. + _e1 computer disc |
||
| 502 | _aProject paper (Bachelor of Mechanical Engineering with Automotive) -- Universiti Malaysia Pahang -2010 | ||
| 504 | _aBibliography : p. 60-61 | ||
| 520 | 3 | _aThis project is focused to investigate the test rate characteristics through the intake and exhaust ports of four-stroke single cylinder engine (Modenas Kriss 110cc) by using flowbench machine. This investigation is to measure the volumetric flow rate into intake and exhaust valve ports at various valve lift by using flowbench machine. The flow characteristic through the intake and exhaust valves at various engine vacuum conditions must also be investigate. This investigation is done by disassembling the engine in order to obtain the cylinder head. That cylinder head engine is mated to an adapter as replacement for the cylinder block engine. After that, the adapter and cylinder head will be mounted on flow bench machine. The test bench is prepared to vary the intake and exhaust valves lift to be mounted on the flow bench and then the flow test is conducted at various test pressures. A variety of valve opening was measured by using dial gauge and various test pressure is measured at Flowbench setting. The flow bench can read correction test flow and flow velocity. Flow will increase directly proportional to the valve lift. At the highest test pressure, flow is the greatest. | |
| 650 | 0 | _aExhaust systems | |
| 650 | 0 |
_aMotor vehicles _xExhaust |
|
| 999 |
_aVIRTUA40 _c375 _d381 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*9992 | ||