000 02635nam a2200253 a 4500
001 vtls000067863
003 KUKTEM
005 20251114204533.0
008 121219t2012 my ao f m 000 0 eng d
020 _aTHE0003938(Local)
039 9 _a201905141101
_bfauzi
_y201212191429
_zFida
040 _aUMP
090 _aTP156.E6 A85 2012 rs Bc.
100 0 _aNoor Atikah Mohd Badruddin
245 1 0 _aSeparation of oil and water using sugarcane bagasse /
_cNoor Atikah Mohd Badruddin
260 _aKuantan :
_bUMP,
_c2012
300 _axii, 36 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang - 2012
504 _aBibliography: p. 32-33
520 3 _aSugarcane bagasse is one of the agricultural residues from sugar making industry. The usage of this organic waste has not been widely discovered here in Malaysia. In Malaysia sugar industry, estimated one tons of sugarcane generates 280 kg of bagasse. Sugarcane bagasse is a very good fibrous organic waste beside have a very high content of carbon. This research will be investigate the effectiveness of sugarcane bagasse as a material to adsorp oil and water. Other than that, the study is to increase the usage of sugarcane bagasse and reduce the number of organic waste produce by the industry. Raw bagasse and bagasse that is modified using sulphuric acid is used to determined the effectiveness of sugarcane bagasse as material to separate oil, which is in this research, crude palm oil is used. The research are done with different weight of bagasse for each bagasse sample and different size of bagasse. As a result, sugarcane bagasse can adsorp oil from the oil sample because of the high carbon content and adsorption is one of method for separation. The particle size are one of the factors effecting the adsorption capacity. The smaller particle size have greater surface area have higher adsorption capacity. Raw bagasse can adsorp more compare to that is modified using sulphuric acid. Chemical modification by using only sulphuric acid is not signifacantly increasing the adsorption capacity of the bagasse. Sugarcane bagasse can be one of the material to separate oil and water as an alternative method of separation. This alternative method can be used as one of the method to separate oil from water for cleaning the waste oil from oil spills as well as a method to separate oil from palm oil industrial waste.
650 0 _aEmulsions
650 0 _aSeparation (Technology)
999 _aVIRTUA40
_c3756
_d3762
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992