000 02401nam a2200277 a 4500
001 vtls000051953
003 KUKTEM
005 20251114204337.0
008 110314t2010 my a f m 000 0 eng d
020 _aTHE0006530(Local)
039 9 _a201905141506
_bamirul
_c201107131638
_dVLOAD
_y201103141613
_zida
040 _aUMP
090 _aTJ1186 .A45 2010 rs Bc.
100 0 _aAmin Abidin Buran
245 1 0 _aPerformance of coated and uncoated carbide tools while dry machining aluminium alloy/
_cAmin Abidin Buran
246 3 _aPerformance of coated and uncoated carbide tools while dry machining aluminium alloy
_h[electronic resource]
260 _aKuantan, Pahang :
_bUMP,
_c2010
300 _axiv, 54 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 computer file
502 _aProject paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2010
504 _aBibliography : p. 37
520 3 _aCoated and uncoated carbide tools are widely use in metal working industry. This study is to investigate the performance of coated and uncoated carbide tool while dry machining 6061 aluminium alloy in term of surface roughness. There are many factors that affect the performance of cutting tool especially when dry machining. Nowadays, there are many type of cutting tools invented by manufacture engineers to overcome the problem. As an example the coated and uncoated carbide cutting tools. This two cutting tools have their advantages and disadvantages. We try to investigate the best cutting tool whether coated or uncoated carbide cutting tool for dry machining Aluminium Alloy. Response surface methodology (RSM) was use for the analysis of the surface roughness. From this research, the result show the coated carbide tool has better surface roughness than uncoated carbide tool. The surface roughness of coated tool carbide tool can be fine when the cutting speed is 200m/min, depth of cut is 0.5mm and feed is 0.02mm/tooth. The surface roughness of uncoated tool carbide can be fine when the cutting speed is 240m/min, depth of cut is 0.5mm and feed is 0.06mm/tooth.The coated carbide tool is the most suitable in machining aluminium alloy compare to uncoated carbide tool.
650 0 _aCutting tools
650 0 _aSurface (Technology)
650 0 _aMetal-cutting
999 _aVIRTUA40
_c377
_d383
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*6502*9992