000			02062nam a2200277 a 4500
001			vtls000051847
003			KUKTEM
005			20251114204337.0
008			110310t2010 my a f m 000 0 eng d
020			_aTHE0006214(Local)
039		9	_a201905161051 _baida _c201201250829 _dFida _c201107131640 _dVLOAD _y201103102031 _zida
040			_aUMP
090			_aTJ246 .F34 2010 rs Bc.
100	0		_aNabil Fahmi Mohtar
245	1	0	_aModal analysis of pipe joint spiral wound gasket / _cNabil Fahmi Mohtar
260			_aKuantan, Pahang : _bUMP, _c2010
300			_axvii, 68 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM
502			_aProject paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2010
504			_aBibliography : p. 54-55
520	3		_aThis project report deals with dynamic behaviour of spiral wound gasket using theoretical and experimental analysis method. This project report is to study the dynamic properties and behaviour of spiral wound gasket by using modal analysis and compare with the finite element analysis. The structural three-dimensional solid modelling of spiral wound gasket was developed using the SOLIDWORK drawing software. The finite element analysis was then performed using ALGOR (FEA). The finite element model of the components was analyzed using the linear modal analysis approach. Finally, the experimental modal analysis was performed using Impact Hammer Testing method. The natural frequency of the mode shape is determined and comparative study was done from both method results. The comparison between natural frequencies of finite element modelling and model testing shows the closeness of the results. From the results, the percentage error had been determined and the limitation in the natural frequency of the spiral wound gasket is observed.
650		0	_aGasket _xDesign and construction
650		0	_aGasket _xTesting
650		0	_aPiping
650		0	_aSealing (Technology)
999			_aVIRTUA40 _c384 _d390
999			_aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*6502*6503*9992