000 01850nam a2200241 a 4500
001 vtls000075763
003 KUKTEM
005 20251114204538.0
008 131028t2013 my da f abm 000 0 eng d
020 _aTHE0003601(Local)
039 9 _a201905152039
_bzulaiha
_y201310281646
_znabilah
040 _aUMP
090 _aTJ1025 .A36 2013 rs Bc.
100 0 _aNur'Ain Hassan
245 1 0 _aPressure drop study on tubing for gas flow /
_cNur'Ain Hassan
260 _aKuantan, Pahang :
_bUMP,
_c2013
300 _axiii, 79 p. :
_bill. ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper (Bachelor of Chemical Engineering (Gas Technology)) -- Universiti Malaysia Pahang – 2013
504 _aBibliography : p. 73-75
520 3 _aNowadays, tubing was majorly used for pipe replacement in gas industrial or commercial building. This study is to compute pressure drop of gas flow on tube with nitrogen; non-flammable gas, carbon dioxide and oxygen gas as medium. It was conducted on several tubes, 3/8 inch, 1/2 inch, 3/4 inch, 1 inch, and 1 1/2 inch outside diameter size respectively. The data was calculated based on pressure drop mathematical formula. The flow rate was manipulated in order to determine the pressure drop. The pressure was kept constant at 25 psig, 50 psig and 100 psig. A computer simulation also developed to effectively design of the process. The computer simulation was conducted to compute pressure drop at higher pressure, flow rate and size of tube. Data of pressure drop that obtained for each of type gas flow was increases as the flow rate increase and decrease as well as the diameter of tube increase. Results that were obtained can be used as reference and guidance for the designer of gas pipeline.
650 0 _aGas flow
999 _aVIRTUA40
_c3895
_d3901
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*9992