000 02676nam a2200253 a 4500
001 vtls000075499
003 KUKTEM
005 20251114204539.0
008 131017t2012 my da f m 000 0 eng d
020 _aTHE0007415(Local)
039 9 _a201905160941
_bfawwaz
_c201311251614
_dnabilah
_y201310171424
_znabilah
040 _aUMP
090 _aTN730 .A98 2012 rs Bc.
100 0 _aAzrulhafiq Mohd Azizi
245 1 0 _aExperimental and analytical evaluation of bending for mild steel /
_cAzrulhafiq Mohd Azizi
260 _aKuantan, Pahang :
_bUMP,
_c2012
300 _axv, 64 p. :
_bill. ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang – 2012
504 _aBibliography : p. 61-62
520 3 _aThis report deals with analytical experimental and analytical evaluation of bending for Mild steel. Analytical method has been used in sheet metal bending analysis due to its simplistic method as compared simulation. However, the reliability of the method needs to be evaluated against experimental in term of measurement result. Nowdays, many analytical analyses is used to investigate the springback in sheet metal. In manufacturing industries especially, analytical analysis is used in making and determine the accurate dimension of die and punch of a machine. The analytical analysis is the most economical method in determine the springback compared by using real test and any software such as Finite element analysis. This report is done by using analytical analysis of springback using a material of mild steel AISI 1010 on V-bending process and also an experiment of V-bending. The experiment is conducted using 2 mm and 3mm thickness. The springback of mild steel AISI 1010 sheet was investigated using previous study of analytical analysis by Daw Kwei Leu. The effects of the normal anisotropy value R and the strain hardening exponent n on V bending of mild steel AISI 1010 have been studied. Eighteen specimens have been used in tensile test in determine the mechanical properties to be used in analytical analysis. An experiment of eighteen specimens of mild steel sheet were conducted in this experiment and the result were taken. The results of the experiment were compared with analytical analysis to validate the analytical method used. The result of the report show that the analytical method used is applicable but still need improvement and the normal anisotropy R and strain hardening exponent have affected the springback deformation.
650 0 _aMild steel
650 0 _aBending
999 _aVIRTUA40
_c3905
_d3911
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992