000 02709ntm a2200253 a 4500
001 vtls000073076
003 KUKTEM
005 20251114204540.0
008 130705t2012 my da f m 000 0 eng d
020 _aTHE0006643(Local)
039 9 _a201905161508
_bamirul
_c201307051207
_dhuda
_y201307051115
_zhuda
040 _aUMP
090 _aTJ1280 .J36 2012 rs Bc.
100 0 _aJamilah Mustafha
245 1 0 _aPrediction of grinding machinability when grind aluminium alloy using water based coolant /
_cJamilah Mustafha
260 _aKuantan, Pahang :
_bUMP,
_c2012
300 _axvii, 60 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper (Bachelor of Mechanical Engineering (Manufacturing)) -- Universiti Malaysia Pahang - 2012
504 _aBibliography : p. 49-51
520 3 _aOptimization of parameters for the surface quality of material is very important for this research because of higher demands for surface finishing products especially in the manufacturing process. More researchers have tried various methods in order to reduce production cost and to produce very economical machining process. One of the most common machines in the finishing process of the product is grinding machine. For this thesis, the present study involves prediction of grinding machine when grinds aluminium using water based coolant. This thesis has been run to find optimum parameters such as wheel wear and depth of cut. Different number of passes which are single pass and multi pass with different parameters will be studied and compared. Another objective of this thesis is to investigate surface roughness produced during grinding process. Prediction model of surface roughness was developed to present accurate data. The selected material for this study was Aluminium Alloy 6061 T6 and was used water based coolant as cooling lubrication. Experiments were conducted based on Design of Experiment (DOE) and the Neural Network is employed to find optimum parameters and predicted of surface roughness and wheel wear for the selected material. These experiments were divided into two by using two different grinders which are aluminium oxide and silicon carbide. The surface roughness was measured at every increment of 2µm depth of cut. The results have found that the surface roughness increased when the depth of cut increased while the surface roughness decreased when number of passes increased. Besides, the surface quality becomes smoother when using Aluminium Carbide as grinder compared to Silicon Carbide.
650 0 _aGrinding and polishing
650 0 _aSurface roughness
999 _aVIRTUA40
_c3927
_d3933
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992