| 000 | 01826ntm a2200253 a 4500 | ||
|---|---|---|---|
| 001 | vtls000074003 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204540.0 | ||
| 008 | 130822t2012 my da f m 000 0 eng d | ||
| 020 | _aTHE0003844(Local) | ||
| 039 | 9 |
_a201905161545 _bshah _c201905161545 _dshah _c201905161545 _dshah _y201308221453 _zhuda |
|
| 040 | _aUMP | ||
| 090 | _aTP156.A35 N67 2012 rs Bc. | ||
| 100 | 0 | _aMohamad Norahiman Abdurahman | |
| 245 | 1 | 0 |
_aAdsorption studies of synthetic batik dye using granular activated carbon in continuous system / _cMohamad Norahiman Abdurahman |
| 260 |
_aKuantan, Pahang : _bUMP, _c2012 |
||
| 300 |
_axiii, 38 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM |
||
| 502 | _aProject paper (Bachelor of Chemical Engineering (Gas Technology)) -- Universiti Malaysia Pahang - 2012 | ||
| 504 | _aBibliography : p. 30-33 | ||
| 520 | 3 | _aFrom this experiment, activated carbon as the adsorbent which from coconut shell is taken from industry. As well as methylene blue as the adsorbate. Dye will be flowed to the packed bed continuously. Two parameters will be concerned in this experiment which is initial concentration and time. In order to determine how this parameters will affect the adsorption process, so the percentage of loss concentration of dye will be determined. What will be expected is the higher initial concentration, the higher the adsorption capacity. Similar to time parameter, the longer time it takes, the percentage of concentration loss will be increase. So, from the data,the maximum percent removal of methylene blue is 87.7% for 40 ppm MB concentration, and adsorption start to constant after 3 hour contact time | |
| 650 | 0 | _aAdsorption | |
| 650 | 0 |
_aDyes and dyeing _xChemistry |
|
| 999 |
_aVIRTUA40 _c3942 _d3948 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992 | ||