MARC View

000			02038nam a2200241 a 4500
001			vtls000075565
003			KUKTEM
005			20251114204540.0
008			131017t2012 my da f m 000 0 eng d
020			_aTHE0007425(Local)
039		9	_a201905160951 _bfawwaz _c201311251626 _dnabilah _y201310171705 _znabilah
040			_aUMP
090			_aTP159.N6 S93 2012 rs Bc.
100	0		_aMohd Syazwan Zulkipli
245	1	0	_aDevelopment of a new type of sprayer head of a water mist system / _cMohd Syazwan Zulkipli
260			_aKuantan, Pahang : _bUMP, _c2012
300			_axvi, 97 p. : _bill. ; _c30 cm. + _e1 CD-ROM
502			_aProject paper (Bachelor of Mechanical Engineering (Automotive Engineering)) -- Universiti Malaysia Pahang – 2012
504			_aBibliography : p. 79-81
520	3		_aWater mist heads are used in close areas to provide direct and constant mists of water for rapid cooling, watering plant, and fire extinguisher. Majority of the water mist’s types in the market has certain problem such as need high pressure and high water volume. Thus, the main aim of this study is to determine the best design of the water mist head. From literature review, the author identifies two parameters as a major concerned, i.e. pressure and flow rate. Three water mist’s head prototypes have been produced using RP machine. Then, the experimental works have been conducted with six test configurations, combination of three pressures and three diameters, to determine the mist patterns. For water pressure, the analysis is on 1.4, 1.8 and 2.2 kgforce and for diameter used in range 0.5, 1.0 and 1.5mm. The measured variables are the length of mist spread out from the nozzle. The result show that the optimum design is for the case 7.5mm at pressure 1.8bar and diameter 1.5mm for nozzle with designed internal flow and 20mm at pressure 2.2bar and diameter 1.0mm for nozzle with normal internal flow.
650		0	_aSpray nozzles
999			_aVIRTUA40 _c3944 _d3950
999			_aVTLSSORT0080020004000900100024502600300050205040520065009992