000 02100nam a2200253 a 4500
001 vtls000075442
003 KUKTEM
005 20251114204545.0
008 131017t2013 my da f m 000 0 eng d
020 _aTHE0003265(Local)
039 9 _a201905161155
_birma
_c201311251605
_dnabilah
_y201310171014
_znabilah
040 _aUMP
090 _aTD757 .A55 2013 rs Bc.
100 0 _aMohd Amirul Hakim Hamidi
245 1 0 _aRemoval mercury from wastewater by electrocoagulation using iron plate as electrode /
_cMohd Amirul Hakim Hamidi
260 _aKuantan, Pahang :
_bUMP,
_c2013
300 _axiii, 59 p. :
_bill. ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper (Bachelor of Chemical Engineering (Chemical Engineering)) -- Universiti Malaysia Pahang – 2013
504 _aBibliography : p. 57-59
520 3 _aElectrocoagulation is the removal process that based on electricity which used electrolysis concept. This process can remove contaminant like mercury which cannot be removed through filtration. This technique is economic and environmental friendly for wastewater treatment. Research studied was performed using synthetic mercury to determine the efficiency of mercury removal using this process. The objective of this research is to investigate the efficiency of mercury removal using iron electrode using different parameters including flow rate, charge loading and distance between electrodes. Electrocoagulation OT-1 model was used to perform the experiment and conductivity meter was used to perform the analysis. After all the analysis were performed its shows significant result which is about 90.10% of mercury successfully removed from the synthetic mercury solution. The highest flow rate 160 L/h and longest distance between electrodes 5cm contributed to the result of 90.10% removal of mercury from synthetic mercury solution. The highest charge loading also play importance role on removal of mercury.
650 0 _aElectrocoagulation
650 0 _aSewage
_xPurification
999 _aVIRTUA40
_c4064
_d4070
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992