MARC View

000			02152ntm a2200241 a 4500
001			vtls000072792
003			KUKTEM
005			20251114204547.0
008			130627t2012 my da m 000 0 eng d
020			_aTHE0007702(Local)
039		9	_a201905241026 _bfawwaz _c201307051508 _dhuda _y201306271610 _zhuda
040			_aUMP
090			_aTS250 .A39 2012 rs Bc.
100	0		_aMohd Adzlan Mohd Azmi
245	1	0	_aExperimental & numerical study on sheet metal lateral bending with both ends pinned / _cMohd Adzlan Mohd Azmi
260			_aKuantan, Pahang : _bUMP, _c2012
300			_axvi, 67 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM
502			_aProject Paper (Bachelor of Mechanical Engineering with Automotive) -- Universiti Malaysia Pahang - 2012
504			_aBibliography : p. 59-61
520	3		_aThe main aim of this study is to compare the buckling phenomenon of metal strip under both ends pinned setting. Buckling may be demonstrated by pressing the opposite edge of a plate toward one another. In achieving the objective, this research involves design and fabrication of the buckling test rig, run the experiment on test rig under condition both ends are pinned and to compare the experimental result with computer simulation. This thesis describes the methods of designing, fabricating and experiment the lateral bending test equipment. Started with test rig design, it has been developed. using SOLIDWORKS 2011.It is continued with fabrication work in FKM laboratory. Specific for the pinned ends design, V shape feature has been adopted in the design using a rectangular aluminum. The next stage is on experimental work, where the tests have been conducted as the planned test loading. The specimen showed buckling phenomenon and strain has been measured using the strain gauge connected to data logger system. The value of strain from experimental will be compare with strain values from ABAQUS simulation. From this project, we can prove that the experimental result is same with the simulation result.
650		0	_aSheet-metal work
999			_aVIRTUA40 _c4134 _d4140
999			_aVTLSSORT0080020004000900100024502600300050205040520065009992