000 02037nam a2200253 a 4500
001 vtls000075690
003 KUKTEM
005 20251114204548.0
008 131021t2013 my da f abm 000 0 eng d
020 _aTHE0005020(Local)
039 9 _a201905140914
_bSHAHRILJ
_c201310220833
_dnabilah
_y201310211703
_znabilah
040 _aUMP
090 _aTS875 .F35 2013 rs Bc.
100 0 _aFakhri Fadullilah Sulaiman
245 1 0 _aFabrication of medium density fibre board from oil palm frond using waste Low Density Polyethylene (LDPE) composites as possible partial replacement for binder /
_cFakhri Fadullilah Sulaiman
260 _aKuantan, Pahang :
_bUMP,
_c2013
300 _axii, 42 p. :
_bill. ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang – 2013
504 _aBibliography : p. 35-37
520 3 _aThere are two objectives in this research. The first objective is to produce the high quality of medium density fibre board from waste biomass material, oil palm frond mixed with waste LDPE composites at the same time reducing the percentages of urea formaldehyde resin. The second objective is to characterize the physical and mechanical properties of fibre board. This research is very important to environment, it is one of the solution in order to reduce the emmission of toxic formaldehyde from MDF. Different composition are use in order to produce the high fibre board in terms of strength and swelling effect. In industry, urea formaldehyde is use as a binder in fibre board manufacturing. In this research, the waste LDPE composite is selected as a possible partial replacement for binder in order to reduce the emission of toxic formaldehyde. Based on this research, the high quality fibre board can be produced which achieved the industrial requirement but strictly limited in its application.
650 0 _aFiberboard
650 0 _aPolyethylene
999 _aVIRTUA40
_c4152
_d4158
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992