000			01869nam a2200253 a 4500
001			vtls000075595
003			KUKTEM
005			20251114204552.0
008			131018t2012 my da f m 000 0 eng d
020			_aTHE0006828(Local)
039		9	_a201905291247 _bamirul _c201311251629 _dnabilah _y201310181000 _znabilah
040			_aUMP
090			_aTK4660 .N47 2012 rs Bc.
100	1		_aNg, Shing Shian
245	1	0	_aInvestigation of MIG welding to the corrosion behaviour of heat treated carbon steel / _cNg Shing Shian
260			_aKuantan, Pahang : _bUMP, _c2012
300			_axix, 80 p. : _bill. ; _c30 cm. + _e1 CD-ROM
502			_aProject paper (Bachelor of Mechanical Engineering (Manufacturing Engineering)) -- Universiti Malaysia Pahang – 2012
504			_aBibliography : p. 61-63
520	3		_aThe corrosion behaviour of metal inert gas (MIG) welded heat treated carbon steel was investigated. Filler material of ER308L and ER70S were used to complete the butt joint welding on non-heat treated and heat treated low carbon steel (AISI 1010). The welding heat input was manipulated by varying the welding voltage for MIG welding process. The microstructures for welded specimens were analysed with the optical microscope. During the electrochemical test, the corrosion rate on the carbon steel was determined. Microstructural analysis for specimen without cleaning and after cleaning was analysed by using SEM. Results showed that the increase in welding heat input was highly significant to the corrosion rate of carbon steel. The welding heat input was able to change the ferrite content on the microstructure of specimen which affected the corrosion rate on the carbon steel.
650		0	_aGas metal arc welding
650		0	_aSteel _xCorrosion _xTesting
999			_aVIRTUA40 _c4259 _d4265
999			_aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992