| 000 | 01711nam a2200241 a 4500 | ||
|---|---|---|---|
| 001 | vtls000078139 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204556.0 | ||
| 008 | 140509t2013 my a f m 000 0 eng d | ||
| 020 | _aTHE0006434(Local) | ||
| 039 | 9 |
_a201905131524 _bamirul _c201405090943 _dtraining3 _y201405090940 _ztraining3 |
|
| 040 | _aUMP | ||
| 090 | _aTJ857 . A55 2013 rs Bc. | ||
| 100 | 0 | _aAnis Syarliza Ahmad | |
| 245 | 1 | 0 |
_aModeling, simulation and experimental verification of hydraulic servo system / _cAnis Syarliza Ahmad |
| 260 |
_aKuantan, Pahang : _bUMP, _c2013 |
||
| 300 |
_axvi,47 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM |
||
| 502 | _aProject paper (Bachelor of Engineering in Manufacturing) -- Universiti Malaysia Pahang – 2013 | ||
| 504 | _aa Bibliography : p. 46-47 | ||
| 520 | 3 | _aThe aim of this project is to model, simulate and analyze the performance of the hydraulic servo system using MATLAB and Simulink. Experiments were conducted using open loop and closed loop control. In open loop control, the experiment was conducted for various speeds by supplying voltage to actuator from 5V to 10V. The open loop experimental data were used to determine the transfer function of the system. In closed loop control, the PI, PD and PID controllers were implemented in the hydraulic servo system and the desired positions were set to 30 mm, 50 mm and 70 mm. The results of the closed loop control showed that the PID controller produced better performance. The results also indicate that the transfer function model represented the actual system very well. | |
| 650 | 0 | _aHydraulic servomechanisms | |
| 999 |
_aVIRTUA40 _c4372 _d4378 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*9992 | ||