MARC View

000			02171nam a2200241 a 4500
001			vtls000078090
003			KUKTEM
005			20251114204609.0
008			140508t2013 my da f m 000 0 eng d
020			_aTHE0007483(Local)
039		9	_a201905161326 _bfawwaz _c201405081419 _dFida _y201405081227 _zFida
040			_aUMP
090			_aTP1180.P65 A46 2013 rs Bc.
100	0		_aSiti Amni Husna Roslan
245	1	4	_aThe effect of recycled – high density polyethylene (hdpe) mixing ratio on the tensile strength of high density polyethylene (hdpe) polymer / _cSiti Amni Husna Roslan
260			_aKuantan, Pahang : _bUMP, _c2013
300			_aix, 39 p. : _bill. ; _c30 cm. + _e1 CD-ROM
502			_aProject paper (Bachelor of Engineering in Manufacturing) -- Universiti Malaysia Pahang – 2013
504			_aBibliography : p. 31-33
520	3		_aHigh Density Polyethylene (HDPE) polymer is widely being used nowadays. The advantages possessed by this polymer make it more preferable than metals. Lightweight, ease of manufacture, stronger and tough are HDPE specialties that make it as the top choice by manufacturers. However, the main disadvantages about this material is that their decaying consumes much time and this effects the environment as this material will dispose as wastes if they could not longer being used. Also, cause loss to certain companies. Therefore, ways to overcome this problem must be found, which is by recycling process. In recycling HDPE polymer, there is one method that mostly been used which is by mixing the recycled HDPE with pure HDPE with certain percentage of both materials. In this project, the pure HDPE were mixed with recycled HDPE according to determined percentages. The samples produced then will undergo tensile test in order to determine the percentage which posses the optimum tensile strength. In the end of experiment, it showed that the mixture with 90% of pure HDPE with 10% recycled HDPE is the best percentage compared to others. This experiment was conducted by following ASTM D638.
650		0	_aPolyethylene
999			_aVIRTUA40 _c4805 _d4811
999			_aVTLSSORT0080020004000900100024502600300050205040520065009992