| 000 | 01960ntm a2200253 a 4500 | ||
|---|---|---|---|
| 001 | vtls000079179 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204615.0 | ||
| 008 | 140602t2013 my a f m 000 0 eng d | ||
| 020 | _aTHE0007282(Local) | ||
| 039 | 9 |
_a201905141145 _bfawwaz _c201406061006 _dtraining1 _c201406021017 _dtraining1 _c201406021017 _dtraining1 _y201406021011 _ztraining1 |
|
| 040 | _aUMP | ||
| 090 | _aTL257 .I99 2013 rs Dip. | ||
| 100 | 0 | _aMohd Izzat Zulkafli | |
| 245 | 1 | 0 |
_aFabrication of hybrid air ATV rear suspension system / _cMohd Izzat Zulkafli |
| 260 |
_aKuantan, Pahang : _bUMP, _c2013 |
||
| 300 |
_axiii, 41 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM |
||
| 502 | _aProject paper (Diploma of Mechanical Engineering)-- Universiti Malaysia Pahang – 2013 | ||
| 504 | _aBibliography : p. 36 | ||
| 520 | 3 | _aThis thesis deals with the fabrication of Hybrid Air ATV rear suspension.The objectives are to reverse engineering of independent rear suspension unit for ATV motorcycle and to fabricate the working prototype of rear suspension unit for ATV motorcycle.The scope identified are design a suitable suspension for ATV motorcycle and fabricate the rear suspension using a provide materials and machine.There are many steps taken to fabricate this ATV motorcycle.The first stage of these steps is do some Literature review about suspension unit.The second steps is planning the suspension unit to combine the chassis body.The design of suspension unit are provided by senior of project.Next stage is do some work like welding,cutting, drilling, and marking.Thus ,finishing this project ,the objectives of the project is achieved. Finally ,the conclusion about this project and the recommendation for the future plan also attached together with this thesis. | |
| 650 | 0 | _aAll terrain vehicles | |
| 650 | 0 |
_aMotor vehicles _xSprings and suspension |
|
| 999 |
_aVIRTUA40 _c4975 _d4981 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992 | ||