000			01958nam a2200229 a 4500
001			vtls000018740
003			KUKTEM
005			20251114204341.0
008			070315t2006 my f m 000 0 eng d
020			_aTHE0003152(Local)
039		9	_a201905161254 _bzul _c201107131906 _dVLOAD _c200908141307 _dVLOAD _c200908141239 _dVLOAD _y200703151525 _zkam
040			_aUMP
090			_aTD430 .S27 2006 rs Thesis
100	0		_aSiti Sarrah Ridzuan
245	1	0	_aWastewater treatment using combination of stainless steel membrane and adsorption system / _cSiti Sarrah Binti Ridzuan
260			_aKuantan, Pahang : _bKUKTEM, _c2006
300			_a46 p. : _bill. ; _c30 cm. + _e1 compter disc
502			_aProject paper (Bachelor of Chemical Engineering) -- Kolej Universiti Kejuruteraan & Teknologi Malaysia - 2006
520			_aA fabricate design of combination membrane filtration and absorption system was used to treat palm oil waste to comply with standard B in regulation of environment act, 1974. This systems as adopted was found to be an efficient method to remove parameters in palm oil waste. The parameters that involves in this study are BOD (Biochemical Oxygen Demand), COD (Chemical Oxygen Demand), pH, TDS (Total Dissolve Solid) and turbidity. From this experiment, the comparison effectiveness between only using membrane filtration and using a combination of stainless steel membrane (membrane filtration) with adsorption columns (adsorption system) can be proven. The adsorbents used in the columns were activated carbon, activated alumina, rice husk and wood waste. The best types of adsorption columns can be determine from this experiment. The columns having a diameter of 6 cm with bed depth 500 cm could treat COD and BOD at average 81.3 % and 79.55%. Effect of flow rate, blank concentration and amount adsorb were studied
650		0	_aWater _xPurification
999			_aVIRTUA40 _c501 _d507
999			_aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5200*6500*9992