000 02173ntm a2200241 a 4500
001 vtls000079479
003 KUKTEM
005 20251117113228.0
008 140603t2013 my a f m 000 0 eng d
020 _aTHE0005845(Local)
039 9 _a201905131624
_baida
_c201406061043
_dtraining2
_c201406060921
_dFida
_c201406031601
_dtraining2
_y201406031600
_ztraining2
040 _aUMP
090 _aTA418.9.C6 N37 2013 rs Dip.
100 0 _aMuhammad Naqeeb Meor Ruslan
245 1 0 _aFabrication of automative body part using carbon fiber /
_cMuhammad Naqeeb Meor Ruslan
260 _aKuantan, Pahang :
_bUMP,
_c2013
300 _axiv, 41 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper (Diploma of Mechanical Engineering) -- Universiti Malaysia Pahang - 2013
504 _aBibliography : p. 40
520 3 _aThis thesis presents the fabrication of automotive part using carbon fiber. In this modern era, carbon fiber became high demand in the market. This is because sports like racing such as sport car racing, motorcycle racing and bicycle racing become famous. So carbon fiber became popular among the racer because carbon fiber is strong, light at once can reduce the part of automotive and increase the speed of vehicle. Beside carbon fiber do not rust and the out layer is interesting. The project has to begin with choosing 4 automotive parts. The selected parts are side mirror, box, motor cycle body part and oil tank cover. These parts consist of different shape which is flat, curve and flat curve. Based on that, the difficulty of fabricate this project can be determined. These parts have designed using SolidWork engineering drawing software for the structural threedimensional solid modeling. All the step and procedure of fabricate the glass fiber and carbon fiber was listed in this thesis. The problem faced during making this project and the problem solving also have in this thesis. Lastly, for making the product better and perfect the recommendation for the future work was been discussed in this thesis.
650 0 _aCarbon fibers
999 _aVIRTUA40
_c5060
_d5066
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*9992