| 000 | 02211nam a2200241 a 4500 | ||
|---|---|---|---|
| 001 | vtls000079035 | ||
| 003 | KUKTEM | ||
| 005 | 20251117113228.0 | ||
| 008 | 140529t2012 my a f m 000 0 eng d | ||
| 020 | _aTHE0006361(Local) | ||
| 039 | 9 |
_a201905131249 _bamirul _c201905131032 _damirul _c201405301523 _dtraining1 _y201405291539 _ztraining1 |
|
| 040 | _aUMP | ||
| 090 | _aTJ790 .Y88 2012 rs Dip. | ||
| 100 | 1 | _aYuvarajan Naidu Thanarajan | |
| 245 | 1 | 0 |
_aDesign and fabrication of leak test rig / _cYuvarajan Naidu Thanarajan |
| 260 |
_aKuantan, Pahang : _bUMP , _c2012 |
||
| 300 |
_axv, 49 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM |
||
| 502 | _aProject paper (Diploma of Mechanical Engineering)-- Universiti Malaysia Pahang – 2012 | ||
| 504 | _aBibliography : p. 42-43 | ||
| 520 | 3 | _aThis thesis deals with the design and fabrication of leak test rig. This thesis will discuss about leakage problems in industrial pipelines. The objective of this thesis is to design and fabricate a leak test rig. The thesis describes the approaches of designing and fabricating a leak test rig. There are numerous steps taken to design and fabricate the test rig. The structural three-dimensional solid modelling design of test rig was developed by using the Solidwork engineering drawing software. The fabrication process also undergoes many steps such as material marking, cutting, drilling, welding and grinding. In addition, it also explains the procedure of testing by the simulation of three types of common leakages which includes pinhole, pipe crack/dent and gasket leak. The testing the rig is also explained in this thesis by maintaining a pressure of 4 bars in the test rig to prove whether the test rig is functioning efficiently. Finally, the conclusion about this project is that the project objectives were achieved which was design and fabrication of a leak test rig and the recommendations for the improvement of the rig are also included together with this thesis as for instance to design and fabricate a support the leak test rig to statically hold it in place. | |
| 650 | 0 | _aTwo-stroke cycle engines | |
| 999 |
_aVIRTUA40 _c5061 _d5067 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*9992 | ||