000 02411ntm a2200253 a 4500
001 vtls000079486
003 KUKTEM
005 20251117113228.0
008 140603t2013 my a f m 000 0 eng d
020 _aTHE0007629(Local)
039 9 _a201905171156
_bfawwaz
_c201406061044
_dtraining2
_c201406060922
_dFida
_y201406031615
_ztraining2
040 _aUMP
090 _aTS171.8 .S53 2013 rs Dip.
100 0 _aMuhammad Shahiruddin Alias
245 1 0 _aDesign and development of 3D foot scanning rig /
_cMuhammad Shahiruddin Alias
260 _aKuantan, Pahang :
_bUMP,
_c2013
300 _axii, 47 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper (Diploma of Mechanical Engineering) -- Universiti Malaysia Pahang - 2013
504 _aBibliography : p. 42
520 3 _aThis research is about design and development of 3D foot scanning rig. In 3D scanning industries, there are two mains applications that were used. There are David Laser Scanner and Kinect. For this research, it more focused into Kinect. Kinect is a motion sensing input device that can scan a subject and change to 3D image in Skannet’s software. Until todays, there is no rig that had made for kinect. The significant to develop kinect’s rig is to make the scanner easy to scan and can produce an accurate 3D image in the software. The objectives of this research are to design and fabricate the portable 3D foot scanning rig and to design a scanning rig that can get a constant radius when circulate a subject. In this research, there are two methodologies that are used. Firstly, design and fabricate the rig. The fabrication process included in this project is cutting of material, machining, drilling and finishing. The selection of the materials and the reasonbehind the selection are shown based on criteria predetermined. Second methodology is testing the rig. A kinect is attached to the rig and it circulates the subject. The scan result or the 3D image of the subject is shown in Skannect’s software. Modification process is done after the testing. From this rig, an excellent result had been produced. The rig can capture the subject’s image accurately and sharp in short time. It shows the rig can be used in future.
650 0 _aRapid prototyping
650 0 _aThree-dimensional printing
999 _aVIRTUA40
_c5066
_d5072
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992