000 02152nam a2200253 a 4500
001 vtls000080909
003 KUKTEM
005 20251117113229.0
008 140613t2013 my a f m 000 0 eng d
020 _aTHE0005694(Local)
039 9 _a201905211438
_bhanafiah
_y201406131137
_zFida
040 _aUMP
090 _aTA405 .F35 2013 rs Bc.
100 0 _aMuhammad Fakhrul Hashim
245 1 0 _aToughness investigation on ferrous-nonferrous weld metal joint (galvanized iron-aluminium alloy) /
_cMuhammad Fakhrul Hashim
260 _aKuantan, Pahang :
_bUMP,
_c2013
300 _axv, 64 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper ( Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2013
504 _aBibilography : p. 63-64
520 3 _aDissimilar metal welding is still a new field that need more scientific research in order to apply in industry. This thesis deals in study and finding the toughness of welded of galvanized iron and aluminium alloy. The objective of this study are to investigate of toughness of dissimilar metal welding between galvanized iron (GI) and aluminium alloy (AA1100) and also to study optimize parameters of dissimilar metal welding by using aluminium filler AA5356 using Taguchi method. Nine experiments need to be conducted, and then toughness, hardness and microstructure test were conducted. The parameters used are current (110 A, 115 A, 120 A), voltage (17V, 18 V, 19 V), speed (3 mm/s, 4 mm/s, 5 mm/s) and angle (0°, 15°, 35°). From the result, it can be seen that current is the most influential parameter followed by speed and voltage in toughness and also based on Taguchi analysis, the optimize parameter is Current (115 A), Voltage (17 V) and Speed (5 mm/s), this optimize parameter were verified through confirmation experiment. The Regression analysis shows the equation of toughness strength. The microstructure observation shows common defects happen on dissimilar metal welding.
650 0 _aWelded joints
650 0 _aStrength of materials
999 _aVIRTUA40
_c5098
_d5104
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992