000 02047ntm a2200253 a 4500
001 vtls000083951
003 KUKTEM
005 20251117113231.0
008 141121t2013 my a f m 000 0 eng d
020 _aTHE0007676(Local)
039 9 _a201905171537
_bfawwaz
_y201411211211
_zfawwaz
040 _aUMP
090 _aTS227 .I46 2013 r Bc.
100 0 _aIlmanfaiq Hamzah
245 1 0 _aEffect of mig and tig welding on hybrid structure using modal analysis /
_cIlmanfaiq Hamzah
260 _aKuantan, Pahang :
_bUMP,
_c2013
300 _axii, 31 p. :
_bill. ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2013
504 _aBibliography : p. 29-31
520 _aNowadays, joining dissimilar metal by using welding are used in manufacturing industries such as automaker industries. While the common use welding types are Tungsten Inert Gas (TIG) and Metal Inert Gas (MIG). The purpose of joining dissimilar metal is to minimize the cost while maximizes the performance and efficiency of a machine or structure by composing the properties of different metal. Therefore, this project was carried out to study the effect of MIG and TIG welding effect to the hybrid structure using modal analysis. This effect can be determined by investigating dynamic characteristic which was obtained using modal analysis. Aluminium 1100 plate and Stainless steel 304 plate were materials that had been chosen to join using MIG and TIG welding. Experimental modal analysis has been done on both dissimilar plates to obtain the dynamic characteristic. Overall, the comparison result between FEA and EMA show a good consistency error between FEA and EMA and range from 1.16 % to 22.52 %. This study also showed that MIG welding produces structures that has higher natural frequencies compare with the structure that was welded by TIG
650 0 _aWelding
650 0 _aAluminum
_xWelding
999 _aVIRTUA40
_c5142
_d5148
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992