MARC View

000			02026ntm a2200241 a 4500
001			vtls000083013
003			KUKTEM
005			20251117113235.0
008			141104t2013 da f m 000 0 eng d
020			_aTHE0006218(Local)
039		9	_a201905161059 _baida _y201411041516 _zFida
040			_aUMP
090			_aTJ254.5 .K66 2013 r Bc.
100	1		_aKong, Deyi
245	1	0	_aCFD simulation of particle mixing in a fluidized bed / _cKong Deyi
260			_aKuantan, Pahang : _bUMP, _c2013
300			_axiv, 60 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM
502			_aProject Paper (Bachelors of Mechanical Engineering with Automotive Engineering) -- Universiti Malaysia Pahang – 2013
504			_aBibliography : p. 46-47
520	3		_aThis project is to do the research of CFD simulation of particle mixing in a fluidized bed.Nowadays, fluidized bed is widely used in different kinds of industry, such aspower plant, petroleum industry and food processing industry. The objectives of this project are to study the mixing and segregation phenomena in a fluidized bed and to design distributors with low pressure drop operation. Fluidized beds suspend solid fuels on upward-blowing jets of air during the combustion process. The main characteristicof fluidized bed are pressure drop, fluid velocities, bubble size and bed heightComputational fluid dynamics (CFD) simulation is the method to study this project. Firstly, Ergun 6.2 software is used to study particle mixing and segregation phenomenaSecondly, 3D geometry of fluidized bed is drawn by using Solidworks 2012. Flowsimulation program is used to study pressure drop in the fluidized bed 3D drawing.Minimum fluidized velocity and operation point is found by using Ergun 6.2 softwarePressure drop is found by using Flow Simulation program. Compare with otherresearcher ’s results these simulation results are accepted.
650		0	_aFluidized-bed combustion
999			_aVIRTUA40 _c5271 _d5277
999			_aVTLSSORT0080020004000900100024502600300050205040520065009992