000 03140ntm a2200277 a 4500
001 vtls000084831
003 KUKTEM
005 20251117113236.0
008 150113t2014 my a f m 000 0 eng d
020 _aTHE0004638(Local)
039 9 _a201905141559
_bazhar
_c201712041052
_dhuda
_y201501131652
_zfawwaz
040 _aUMP
090 _aTP359.B46 L56 2014 r Bc.
100 3 _aLin, Tan Ban
245 1 0 _aProduction of the high quality torrefied oil palm biomass for efficient energy application /
_cTan Ban Lin
260 _aKuantan, Pahang :
_bUMP,
_c2014
300 _axiv, 56 p. :
_bill. ;
_c30 cm. +
_e1 CD-ROM
500 _aFaculty of Chemical & Natural Resources Engineering
502 _aProject paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang – 2014
504 _aBibliography : p. 48
520 3 _aThe modern technology nowadays has led to a high consumption of energy where renewable energy sources become one of the hottest topics among the scientists. Biomass, as one of the promising renewable energy sources become the most attractive energy source in the world. Hence, this study aims to produce the high quality of torrefied oil palm biomass for efficient energy application. Torrefaction is known as the mild form of pyrolysis where the process occurs at atmospheric pressure and the temperature ranging of 473-573 K with the absence of oxygen. The raw materials selected for the study are the empty fruit bunch (EFB), mesocarp fiber and the kernel shell. The main reason of selected oil palm waste as the biomass raw material is due to its availability as Malaysia is the second largest producer of palm oil in the world. The experiment was carried out by using a tubular reactor which was located at the Gas Engineering Lab of University Malaysia Pahang. Results obtained showed that the powder form of all the samples have fully decomposed after torrefaction process, hence, the experiment was carried on with the fibrous form of samples for a better scale of study. The calorific value (CV) determined using a bomb calorimeter and the result collected showed a trend of increased in CV for all the samples started from EFB to kernel shell as the temperature increased. While for the case of mass yield, the trend was decreased for all the samples when the temperature increased along the torrefaction process. This was due to the thermal decomposition of the structure of samples during the experiment. This had directly affected the trend of energy yield by all the samples as the optimization of energy yield was not achieved at 100% except for kernel shell at 523K and 573K. Fourier Transform Infrared Spectroscopy (FTIR) test was also carried out in order to determine the component and chemical compositions which existed before and after the experiment, and results showed that the structure of the samples was mainly remain the same after the process
650 0 _aOil palm
650 0 _aBiomass
856 4 0 _uhttp://ecollib.ump.edu.my/25805/
_zAccess in library only
999 _aVIRTUA40
_c5287
_d5293
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5000*5020*5040*5200*6500*6501*8560*9992