000 02192ntm a2200253 a 4500
001 vtls000083086
003 KUKTEM
005 20251117113243.0
008 141105t2013 my da f m 000 0 eng d
020 _aTHE0005880(Local)
039 9 _a201905141140
_baida
_c201411131311
_dtraining1
_c201411051223
_dtraining1
_y201411051222
_ztraining1
040 _aUMP
090 _aTA462 .K43 2013 r Bc.
100 0 _aMohamad Khairuazlan Kamaruzaman
245 1 0 _aInvestigation of chloride stress corrosion cracking in austenitic stainless steel /
_cMohamad Khairuazlan Kamaruzaman
260 _aKuantan, Pahang :
_bUMP,
_c2013
300 _axviii, 62 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 CD-ROM
502 _aProject Paper (Bachelors of Mechanical Engineering) -- Universiti Malaysia Pahang – 2013
504 _aBibliography : p. 56-59
520 3 _aChloride stress corrosion cracking (CSCC) of AISI 304 austenitic stainless steel are the most important corrosion processes that affect the performance of this stainless steel. SCC occurs when susceptible material under the stress is exposed to a specific environment such as corrosive environment. Since austenitic stainless steel are widely used in power boiler, nuclear power, chemical plant and marine industry, SCC can cause a major losses to these industry. The purpose of this project is to study the effect of chloride stress corrosion cracking in austenitic stainless steel based on the sensitization treatment of the specimens and different concentration mixtures of sulphuric acid and sodium chloride. Method use in this study was weight loss method. From the measurement and experiment result, it shows that mass loss for specimens with sensitization treatments is higher than mass loss for specimens without sensitization treatment. The experimental result also indicates that SCC occurs only at certain concentration mixtures of sulphuric acid and sodium chloride. This was confirmed by using scanning electron microscope and digital weighing balance.
650 0 _aStress corrosion
650 0 _aCorrosion and anti-corrosives
999 _aVIRTUA40
_c5543
_d5549
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992