000 02456ntm a2200253 a 4500
001 vtls000082980
003 KUKTEM
005 20251117113246.0
008 141104t2013 my da f m 000 0 eng|d
020 _aTHE0007423(Local)
039 9 _a201905160947
_bfawwaz
_c201411050957
_dtraining2
_y201411041209
_ztraining2
040 _aUMP
090 _aTP159.N6 A98 2013 r Bc.
100 0 _aNoor Azuani Suliman
245 1 0 _aInfluence of orifice nozzle geometry on flow and spray characteristics /
_cNoor Azuani Suliman
260 _aKuantan, Pahang :
_bUMP,
_c2013
300 _ax, 37 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 CD-ROM
502 _aProject Paper (Bachelor of Mechanical Engineering (Automotive)) -- Universiti Malaysia Pahang – 2013
504 _aBibliography : p. 38-39
520 3 _aThis thesis presented about the effects of nozzle orifice geometry on flow and spray characteristics. The thesis deals with the analysis on the different inlet diameter of nozzle orifice and the different inlet pressure on the flow and also spray characteristics. The objective of this thesis is to compare the final performance of flow and spray characteristics between the different designs of nozzle orifice. Besides that, the purpose of this thesis is to determine the flow and spray characteristics with different inlet diameter of nozzle orifice. This thesis also purposes to study the flow and spray characteristics with different inlet pressure. The geometry of nozzle orifice used is the inlet diameter and the parameter used is the pressure. The data used for analysis is obtained from the simulation by using Solidworks 2012 software. The post-processing method was performed using the simulation with certain parameters that can be chose and graph is plotted by using assistance software such as Microsoft Excel. From the result, it is observed that the performance of 150 µm diameter of nozzle orifice with inlet pressure of 250 bar is better than other combination of inlet diameter and inlet pressure. Future work, this comparison between different inlet diameter and different inlet pressure must do in experimental to support the result. There are many factors of geometry and parameters that required doing the comparison in order to study the flow and spray characteristics.
650 0 _aFuel systems
650 0 _aSpray nozzles
999 _aVIRTUA40
_c5614
_d5620
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992