000 03722ntm a2200265 a 4500
001 vtls000083695
003 KUKTEM
005 20251117113248.0
008 141119t2014 my a f m 000 0 eng d
020 _aTHE0002443(Local)
039 9 _a201905271505
_bshamsul
_c201710161541
_daishah
_y201411191253
_zfawwaz
040 _aUMP
090 _aTA418.9.C6 F37 2014 r Thesis
100 0 _aSyed Farhan Hasany
245 1 0 _aSynthesis, characterization and optimization of magnetic nanostructures by sol-gel technique and application in water purification /
_cSyed Farhan Hasany
260 _aKuantan, Pahang :
_bUMP,
_c2014
300 _axxiii, 180 p. :
_bill. ;
_c30 cm. +
_e1 CD-ROM
502 _aThesis (Doctor of Philosophy in Chemical Engineering (Advanced materials) -- Universiti Malaysia Pahang - 2014
504 _aBibliography : p. 149-175
520 3 _aTailored maghemite nanoparticles with improved thermo-physical properties have attracted vast interest in current years. The design and synthesis of these particles have generated innovative magnetic, optical and other physical properties that arise from quantum size effect and enhanced surface to volume ratio with huge application significance. Tailored magnetic nanoparticles are prepared either by wet chemical methods such as colloidal chemistry or by dry processes such as vapor deposition techniques. This PhD project, aimed to develop novel vanadium doped maghemite (Fe2−xVxO3) particles with novel properties of ~ 5 nm and nanohybrids of maghemite size ranges from 13-15 nm decorated multiwalled carbon nanotubes (MWCNTs) by wet methods. Tailored maghemite – MWCNTs nanohybrid was later, applied in efficient Lead removal application from aqueous solutions. The synthesis involved a facile Sol-gel route, with control over the size, morphology and the magnetic properties. Tailored maghemite particles were synthesized from a metal precursors and MWCNTs in a single pot reactor assembly, with forced nucleation in slight basic medium at pH ~ 9, yields crystalline, pure phase and thermally stable particles and nanohybrids. The synthesized particles and nanohybrids were characterized for different physical properties; crystallinity, phase purity and transformations, morphology, hydrodynamic particle size, polydispersity, magnetic properties, surface area studies, elemental and oxidation states of iron and vanadium, thermal stability, colloidal stability, zeta potential values and elemental ratios of iron, oxygen and carbon in tailored maghemite – MWCNT nanohybrids. The comparative changes in structural, magnetic, surface area and colloidal properties of the nanoparticles were found significant for future applications in nano devices, magnetic coatings, magnetic separations and other applications. Tailored maghemite – MWCNT nanohybrids were applied for efficient removal of Lead from aqueous solutions in batches magnetically. Lead adsorption mechanism was studied with Kinetics rate, adsorption isotherms. The effects of pH, contact time, adsorbent dosage, and agitation speed on the Pb (II) removal were scrutinized. Repeated adsorption–desorption cycles were studied to investigate the prolonged use of nanohybrids. The maximum removal achieved was ~ 94 % in less than 2 h in a pH range of 6–7, which is very good yield with respect to previous studies. A mathematical model (Minitab version 15) was studied to validate the experimental method for the removal of Lead
650 0 _aPolymeric composites
650 0 _aNanostructured materials
856 4 0 _uhttp://ecollib.ump.edu.my/3733/
_zLibrary access only
999 _aVIRTUA40
_c5687
_d5693
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*8560*9992