MARC View

000			01983nam a2200241 a 4500
001			vtls000063502
003			KUKTEM
005			20251114204345.0
008			120810t2012 my da f m 000 0 eng d
020			_aTHE0006554(Local)
039		9	_a201905141536 _bamirul _c201208131622 _dida _c201208131619 _dida _y201208101520 _zida
040			_aUMP
090			_aTJ1187 .W66 2012 rs Dip.
100	1		_aWong, Fei Yong
245	1	0	_aDesign and fabrication of MIG welding jigs / _cWong Fei Yong
260			_aKuantan, Pahang : _bUMP, _c2012
300			_axiii, 53 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM
502			_aProject paper (Diploma of Mechanical Engineering ) -- Universiti Malaysia Pahang - 2012
504			_aBibliography : p. 46
520	3		_aThis thesis deals with the design and fabrication of MIG welding jigs. The objective of this thesis is to develop welding jigs that able to clamp workpiece and reduce the deflection due to thermal stress. At the same time, the welding jigs also able to clamp workpiece with the thickness up to 8mm and 80 mm width. Clamping design and common welding jigs material was studied in order to design and generate concept for the MIG welding jigs. Solid Works was used to design or draw the final concept of the MIG welding jigs. The material used to fabricate these welding jigs is aluminium block. On the other hand, screw clamp was used to design clamping system for the welding jigs. The welding jigs were design in such an order that it able to adjust the gap between workpiece and give out the gap measurement so that the time taken for the welding research can be reduced. Methods and process involve in accomplish this is the machining process by using conventional milling machine, cutting process by using the vertical bend saw, joining process by using screwing, welding process and filing process
650		0	_aJigs and fixtures
999			_aVIRTUA40 _c609 _d615
999			_aVTLSSORT0080020004000900100024502600300050205040520065009992