| 000 | 02546ntm a2200289 a 4500 | ||
|---|---|---|---|
| 001 | vtls000092168 | ||
| 003 | KUKTEM | ||
| 005 | 20251117113306.0 | ||
| 008 | 151120t2015 my da f abm 000 0 eng d | ||
| 020 | _aTHE0000763(Local) | ||
| 039 | 9 |
_a201905161453 _bnazirah _c201711301545 _dfateeha _y201511201108 _zasma |
|
| 040 | _aUMP | ||
| 090 | _aFKASA .T464 2015 r Bc. | ||
| 100 | 0 | _aTengku Muhammad Hasif Tengku Mohamed Salim | |
| 245 | 1 | 0 |
_aFinite element analysis of 3d steel jacket frame (offshore structure) using ANSYS / _cTengku Muhammad Hasif Tengku Mohamed Salim |
| 260 |
_aKuantan, Pahang : _bUMP, _c2015 |
||
| 300 |
_axviii, 97 p. : _bill. (some col.) ; _c30 cm. + _e1 CD ROM |
||
| 500 | _aFaculty of Civil Engineering and Earth Resources | ||
| 502 | _aProject Paper (Bachelors of Civil Engineering) -- Universiti Malaysia Pahang – 2015 | ||
| 504 | _aBibliography : p. 71-72 | ||
| 520 | 3 | _aJackets were among the very first structures that used in the offshore industry, as stable platforms mainly for oil and gas production facilities. Frame is one of the important elements of this structure. Unfit or improper design can lead to the failure of a structure. The steel jacket frame was analyzed by manual calculation and also design in ANSYS software. There are several methods can be used to analyses the behaviour of steel jacket frame. However, among all these methods, finite element method and probabilistic method will be a very effective method to obtain the strength and behaviour of steel structure. This analysis is to determine the behaviour of frame design for the jacket structure. This research will mainly focus on the steel frame of jacket platform. The yield strength of steel jacket that used is 500 N/𝑚𝑚2 which is the strongest steel. The value for the input variables are generated randomly by using Monte Carlo Simulation or as prescribed samples using Response Surface Methods. 1000 simulations had been made to make sure the analysis is more precise and accurate. Here, the study was conducted to prove that a steel jacket under the existence of randomness and uncertainty can be analyzed by apply probabilistic finite element analysis using ANSYS | |
| 610 | 2 | 0 |
_aFaculty of Civil Engineering and Earth Resources _xDissertations |
| 650 | 0 |
_aUniversities and Colleges _xDissertations |
|
| 650 | 0 | _aTheses | |
| 856 | 4 | 0 |
_uhttp://ecollib.ump.edu.my/id/eprint/25927 _zAccess in library only |
| 999 |
_aVIRTUA40 _c6209 _d6215 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5000*5020*5040*5200*6100*6500*6501*8560*9992 | ||