| 000 | 02783ntm a2200289 a 4500 | ||
|---|---|---|---|
| 001 | vtls000094471 | ||
| 003 | KUKTEM | ||
| 005 | 20251117113315.0 | ||
| 008 | 160418t2016 my da f a 000 0 eng d | ||
| 020 | _aTHE0005303(Local) | ||
| 039 | 9 |
_a201905151039 _bhanafiah _c201712081603 _dsaini _c201604181128 _dsaini _y201604181053 _zsaini |
|
| 040 | _aUMP | ||
| 090 | _aFKP .A46 2016 r Bc. | ||
| 100 | 0 | _aMuhammad Ammar Faris Muhammad Yazid | |
| 245 | 1 | 0 |
_aFinite element analysis of hybrid energy harvesting of Piezoelectric and electromagnetic / _cMuhammad Ammar Faris Muhammad Yazid |
| 260 |
_aKuantan, Pahang : _bUMP, _c2016 |
||
| 300 |
_axvii, 60 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM |
||
| 500 | _aFaculty of Manufacturing Engineering | ||
| 502 | _aProject Paper (Bachelor of Mechatronic Engineering) - (Dual Degree Programme with Karlsruhe University of Applied Sciences, HsKA, Germany) -- Universiti Malaysia Pahang – 2016 | ||
| 504 | _aBibliography: p. 57-59 | ||
| 520 | 3 | _aHarvesting energy from ambient vibrations is a highly sought after method because of the widerange of available sources that produce vibration energy applicable from industrial machinery to human motion application. This report studied the implementation of harvesting energy from two technologies to form a hybrid energy harvester system. These two technologies involves are relate to the piezoelectric harvesting energy as well as the electromagnetic harvesting energy. A finite element model was developed by using the Ansys software with the harmonic analysis solver to analyze and examine hybrid harvesting energy system. The variance dimension of geometry on the bimorph piezoelectric cantilever beam is also being implemented in order to study the performance of the beam relating to the difference perspective of dimension. The proposed length of the cantilever beam was 16.5mm and 36.5mm with the width of 6.35mm, 12.7mm, and 19.05mm. Both power output generated from the magnet and the piezoelectric is then combined to form one unit of energy. The result shows the system generate the maximum power output of 14.85𝜇𝑊 from 100Hz, 4.905𝑚/𝑠2, and 0.6𝑐𝑚3 for resonance frequency, acceleration, and the volume respectively from the selected sample of the energy harvester design. The NPD result of 10.29 𝑘𝑔𝑠/𝑚3compared with other literature also can be used in energy harvesting system for vibration application. | |
| 610 | 2 | 0 |
_aFaculty of Manufacturing Engineering _xDissertations |
| 650 | 0 |
_aUniversities and Colleges _xDissertations |
|
| 650 | 0 | _aTheses | |
| 856 | 4 | 0 |
_uhttp://ecollib.ump.edu.my/id/eprint/4109 _zAccess in library only |
| 999 |
_aVIRTUA40 _c6448 _d6454 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5000*5020*5040*5200*6100*6500*6501*8560*9992 | ||