000 03162ntm a2200289 a 4500
001 vtls000093561
003 KUKTEM
005 20251117113319.0
008 160307t2015 my a f 000 0 eng d
020 _aTHE0001001(Local)
039 9 _a201905171346
_bnazirah
_c201712071146
_dnazri
_y201603071302
_zhuda
040 _aUMP
090 _aFKKSA .R43 2015 r Bc.
100 0 _aRebecca Anak Stephen
245 1 _aTreatment of industrial oleochemical wastewater by electrocoagulation process /
_cRebecca Anak Stephen
260 _aKuantan, Pahang :
_bUMP,
_c2015
300 _axvi, 75 p. :
_bill. ;
_c30 cm. +
_e1 CD-ROM
500 _aFaculty of Chemical & Natural Resources Engineering
502 _aProject Paper (Bachelors of Chemical Engineering) -- Universiti Malaysia Pahang – 2015
504 _aBibliography : p. 61-63
520 3 _aProduction of oleochemical products which derived from biological plant oils and animal fats which react in form of triglycerides with different composition of the alkyl chains which will form fatty acid methyl ester (FAME), fatty alcohols, fatty amines and glycerin can generates wastewater that contain fatty acids, glycerin, organic residues and inorganic acids which really need to be treated before being discharged to the environment especially into any water bodies. Therefore, a research must be conducted to find the solution for this problem. In this study, the potential to treat oleochemical wastewater using electrocoagulation (EC) process was studied. The oleochemical wastewater was collected from FPG Oleochemical Sdn Bhd which is situated in Gebeng, Pahang. The objectives of the study are to determine the optimum operational conditions such as initial pH of wastewater samples, type of electrodes, applied voltage or current density, reaction time and electrodes arrangement for the EC process of oleochemical wastewater in terms of removing the parameters of chemical oxygen demand (COD), oil and grease (O&G) and total suspended solids (TSS) of wastewater. The final pH and turbidity of treated wastewater samples also being determined. Furthermore, there is also a primary treatment or pre-treatment methods that being used to reduce the concentration of the glycerine from wastewater sample. The experiment results show that EC could effectively reduce COD, O&G, TSS and turbidity by 55.72%, 68.48%, 77.46% and 90.31% respectively using aluminium electrode at the optimum conditions of pH 6, applied voltage 20 V and reaction time of 30 minutes. In addition, the experimental results also show that the electrocoagulation can neutralize pH of wastewater. The result that will be obtained will be compared to the Standard A & B of Parameter Limit of Effluent as being outlined by Department of Environment based on Environmental Quality Act 2009.
610 2 0 _aFaculty of Chemical & Natural Resources Engineering
_xDissertations
650 0 _aUniversities and Colleges
_xDissertations
650 0 _aTheses
856 4 0 _uhttp://ecollib.ump.edu.my/26004/
_zAccess in library only
999 _aVIRTUA40
_c6576
_d6582
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5000*5020*5040*5200*6100*6500*6501*8560*9992