000			02029nam a2200229 a 4500
001			vtls000030093
003			KUKTEM
005			20251114204347.0
008			080709t2007 my f m 000 0 eng|d
020			_aTHE0005930(Local)
039		9	_a201905141454 _baida _c201107132029 _dVLOAD _c200908141457 _dVLOAD _c200908141428 _dVLOAD _y200807091519 _zkam
040			_aUMP
090			_aTA492.S25 D34 2007 rs
100	3		_aDahrul Akma Mohd Sabri
245	1	0	_aDesign and fabrication of shear test rig for sandwich cores / _cDahrul Akma Bin Mohd Sabri
260			_aKuantan, Pahang : _bUMP, _c2007
300			_a56 p. : _bill. (some. col.) ; _c30 cm.
502			_aProject paper (Diploma of Mechanical Engineering) -- Universiti Malaysia Pahang - 2007
520	3		_aThis project is focused on redesign the current model of shearing testing instrument and it is also used for testing the shear in sandwich constructions in order of driving the need for efficient, safe cost effective and stability of sandwich core upon the shear loading. The device consists of two main components; a stationary upper platform and a lower platform that contains a base as stage. The principle of operation is that the tissue samples are affixed to both the upper and lower platforms using a thin layer of superglue then bathed in an appropriate physiological solution. The lower platform is moved relative to the fIxed upper platform using the base stage in order to applied load. The test is performed by clamping a test specimens attached in a 20 millimeters width specimen between two metal fIxtures. An upper punch is then forced through the base in the metal fIxture causing shear along the edge of the facing. A universal testing machine is used to push the punch until shearing of the specimen occurs. The manufacturing process included in this project is cutting of material, machining, drilling, threading and finishing.
650		0	_aSandwich construction
999			_aVIRTUA40 _c671 _d677
999			_aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5200*6500*9992