000			01940nam a2200241 a 4500
001			vtls000030094
003			KUKTEM
005			20251114204347.0
008			080709t2007 my f m 000 0 eng|d
020			_aTHE0007765(Local)
039		9	_a201905241512 _bfawwaz _c201107132029 _dVLOAD _c200908141457 _dVLOAD _c200908141428 _dVLOAD _y200807091544 _zkam
040			_aUMP
090			_aTS1549.G5 N39 2007 rs
100	3		_aMohd Nazmi Mohd Nordin
245	1	0	_aDesign and fabrication of MS88 fiberglass helmet / _cMohd Nazmi Bin Mohd Nordin
260			_aKuantan, Pahang : _bUMP, _c2007
300			_a49 p. : _bill. (some. col.) ; _c30 cm.
502			_aProject paper (Diploma of Mechanical Engineering) -- Universiti Malaysia Pahang - 2007
520	3		_aThe fabrication of MS88 fibre glass helmet project was focused in design and fabricates the fibreglass helmet. The design of mould based on MS88 design helmet. The mould use polystyrene material coated by aluminium foil. Using the fibreglass as a main material for fabrication, it can reduce the mass of the helmet and increase the conformability to wear. The process to fabricate the fibreglass helmet is called "lay up" process where the fibreglass mat is applied on the mould layer by layer with the mixture of 99% of polyester resin and 1 % of hardener. However the surface of fibre glass helmet is not smooth enough because of the sphere shape of mold make it hard to apply the fibreglass mat. After the helmet was fabricated, the samples of fibreglass are tested using Compression Testing machine to measure the mechanical properties of fibreglass reinforce plastic(FRP). The overall project can be described as successfully project because the MS88 fibreglass helmet manages to fabricate in the time given. -Author
650		0	_aGlass fibers
650		0	_aHelmets _xDesign and construction
999			_aVIRTUA40 _c672 _d678
999			_aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5200*6500*6501*9992