| 000 | 01953nmm a2200301 a 4500 | ||
|---|---|---|---|
| 001 | vtls000098380 | ||
| 003 | KUKTEM | ||
| 005 | 20251117113332.0 | ||
| 008 | 161209s2016 my fq d 001 0 eng d | ||
| 020 | _aTHE0005071(Local) | ||
| 039 | 9 |
_a201905101523 _bhanafiah _c201712261152 _dnazri _y201612091552 _zsaini |
|
| 040 | _aUMP | ||
| 090 | _aFKP .A458 2016 r Bc. | ||
| 090 | _aCD 10399 | ||
| 100 | 0 | _aAmirul Syafiq Ibrahim | |
| 245 | 1 | 0 |
_aChatter detection on thin wall machining of alluminum alloy under MQL condition _h[electronic resource] / _cAmirul Syafiq Ibrahim |
| 260 |
_aKuantan, Pahang : _bUMP, _c2016 |
||
| 300 |
_a1 computer disc : _bdigital data ; _c12 cm. |
||
| 500 | _aFaculty of Manufacturing Engineering | ||
| 500 | _aTheses Gred B | ||
| 502 | _aProject Paper (Bachelor of Mechatronics Engineering (Hons.)) -- Universiti Malaysia Pahang – 2016 | ||
| 520 | 3 | _aThe purpose of this project was to analyze and study the chatter detection on thin wall machining of aluminum alloy under mql condition. Initially, 3 difference type of thin wall design are selected which is L shape, T shape and Pocket shape, then the chatter phenomenon during the cutting experiment were observed by using the accelerometer with a variable value of depth of cut. Three types of chatter detection method are applying in this experiment to achieve the accurate result which is by acceleration, time domain and surface roughness test. From the results, it was clear that the parameter depth of cut and the design of the thin wall manipulate the occurring of chatter or non-chatter in the machining process. | |
| 610 | 2 | 0 |
_aFaculty of Manufacturing Engineering _xDissertations |
| 650 | 0 |
_aUniversities and Colleges _xDissertations |
|
| 650 | 0 | _aTheses | |
| 856 | 4 | 0 |
_uhttp://ecollib.ump.edu.my/id/eprint/3956 _zAccess in library only |
| 999 |
_aVIRTUA40 _c6950 _d6956 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*0901*1000*2450*2600*3000*5000*5001*5020*5200*6100*6500*6501*8560*9992 | ||