000 02316ntm a2200289 a 4500
001 vtls000098117
003 KUKTEM
005 20251117113335.0
008 161121t2016 my a f m 000 0 eng d
020 _aTHE0000756(Local)
039 9 _a201905161555
_bnazirah
_c201712071621
_dsaini
_y201611211001
_zfateeha
040 _aUMP
090 _aFKASA .T44 2016 r Bc.
100 1 _aTeh, Kai Yao
245 1 0 _aAnalysis of the behaviour large headed stud in terms of shear resistance and failure mode using abaqus /
_cTeh Kai Yao
260 _aKuantan, Pahang :
_bUMP,
_c2016
300 _axiv, 38 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 CD-ROM
500 _aFaculty of Civil Engineering and Earth Resources
502 _aProject Paper (Bachelors of Civil Engineering) -- Universiti Malaysia Pahang – 2016
504 _aBibliography : p. 32-33
520 3 _aHeaded stud are quite popular type of shear connector that is often used in composite structure. Shear connectors were used to resist longitudinal shear forces on the surfaces between steel and concrete. An accurate non-linear finite element model of the push-out test has been developed to investigate the capacity of large stud shear connectors (25mm and above) and the failure mode. The main objective of this study is to discover the effect of changes in stud diameter affect the shear resistance and the failure model on headed stud. There were four model in this analysis which designated as PT 1, PT 2, PT 3, PT 4 and PT 5 with stud diameter size 22mm, 25mm, 27mm, 29mm and 30mm respectively. The load per stud for PT 1, PT 2, PT 3, PT 4 and PT 5 were 103.57kN, 133.08kN, 162.47kN, 195.07kN and 226.44kN respectively. Based on the FEA result, the larger size stud diameter, will produce higher shear resistance. The stress distribution of the model is shown in the failure mode of shear stud and it is located at the weld toes of the in the horizontal direction for the top row of headed stud.
610 2 0 _aFaculty of Civil Engineering and Earth Resources
_xDissertations
650 0 _aUniversities and Colleges
_xDissertations
650 0 _aTheses
856 4 0 _uhttp://ecollib.ump.edu.my/id/eprint/3943
_zAccess in library only
999 _aVIRTUA40
_c7029
_d7035
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5000*5020*5040*5200*6100*6500*6501*8560*9992