000 02927ntm a2200277 a 4500
001 vtls000100953
003 KUKTEM
005 20251117113345.0
008 170816s2016 my da f am 001 0 eng d
020 _aTHE0005315(Local)
039 9 _a201905151047
_bhanafiah
_y201708161544
_zsaini
040 _aUMP
090 _aFKP .A97 2016 r Bc.
100 0 _aAzriee Abdullah
245 1 0 _aEffect of tool rotation on the surface roughness and wear properties of AL6061-AL2O3 metal matrix composites fabricated using friction stir processing /
_cAzriee Abdullah
246 3 0 _aEffect of tool rotation on the surface roughness and wear properties of AL6061-AL2O3 metal matrix composites fabricated using friction stir processing
_h[electronic resource]
260 _aKuantan, Pahang :
_bUMP,
_c2016
300 _axv, 71 p. :
_bill. (some col.) ;
_c30 cm +
_e1 CD ROM
500 _aFaculty of Manufacturing Engineering
502 _aProject Paper (Bachelor of Engineering in Manufacturing (Hons.)) -- Universiti Malaysia Pahang – 2016
520 _aBasically, the previous method of the Friction Stir Welding (FSW) is one of the method that has already being practised in the material engineering field. This method is utmost important in joining two two facing workpieces without melting the workpiece material. However, the scarcity of this method is that it will softened the near region where the FSW is being conducted. Hence, the researcher has come out with a solution where they has improved the disadvantages of the FSW into the Friction Stir Processing (FSP). Here, this new integrated technique is mainly being introduced in order to change the properties of a metal through intense, localized plastic deformation. By referring to the outlined method of this project, this deformation is produced by forcibly inserting a nonconsumable tool into the workpiece, and revolving the tool in a stirring motion as it is pushed laterally through the workpiece. Thence, this steps will manipulated and refined the structure of the cast components of Aluminium alloy 6061 and Aluminium oxide. The rotation speed of the tool has been chosen as the parameter in this project where the outcomes is being measured at the end of this work of study. The higher the rotation speed of the tool value, the mechanical properties of the selected material will be directly improves to a better standard. Beside that, the surface roughness with the presence of the reinforce demonstrating a better result than the surface roughness with the absence of reinforcement. High increment of the tool rotation speed indicates the inclined value of the coefficient of friction of the material.
610 2 0 _aFaculty of Manufacturing Engineering
_xDissertations
650 0 _aUniversities and Colleges
_xDissertations
650 0 _aTheses
999 _aVIRTUA40
_c7293
_d7299
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5000*5020*5200*6100*6500*6501*9992