| 000 | 02830ntm a2200373 i 4500 | ||
|---|---|---|---|
| 001 | vtls000102827 | ||
| 003 | KUKTEM | ||
| 005 | 20251117113348.0 | ||
| 008 | 180122s2017 my a f am 000 0 eng d | ||
| 020 | _aTHE0000901(Local) | ||
| 039 | 9 |
_a201905271512 _bnazirah _c201802201220 _dsaini _c201801221507 _dsaini _y201801221445 _zsaini |
|
| 040 |
_aUMP _beng _cUMP _erda |
||
| 090 | _aFKKSA .H36 2017 r Bc. | ||
| 100 | 0 |
_aMuhammad Haniff Nizulkeman, _eauthor. |
|
| 245 | 1 | 0 |
_aPreparation and characterization of poly lactic acid (PLA) / polyoxymethylene (POM) blends / _cMuhammad Haniff Nizulkeman |
| 264 | 1 |
_aKuantan, Pahang : _bUMP, _c2017 |
|
| 264 | 4 | _c© 2017 | |
| 300 |
_axvi, 55 pages : _billustrations (some color) ; _c30 cm. + _e1 CD-ROM |
||
| 336 |
_atext _2rdacontent |
||
| 336 |
_atext _2rdacontent |
||
| 337 |
_aunmediated _2rdamedia |
||
| 337 |
_acomputer _2rdamedia |
||
| 338 |
_avolume _2rdacarrier |
||
| 338 |
_acomputer dics _2rdacarrier |
||
| 347 |
_atext file _bPDF _2rda |
||
| 500 | _aFaculty of Chemical & Natural Resources Engineering | ||
| 502 | _aProject Paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang – 2017 | ||
| 504 | _aIncludes bibliographical references | ||
| 520 | 3 | _aPlastics are important material in producing goods, for example electronic casing, plastic bag, diapers, groceries apparatus and automotive parts. Many researches have been conducted that polylactic acid (PLA) was produced as a biodegradable thermoplastic polyester from lactic acid. However, PLA has limited applications due to its inherent brittleness, toughness and low elongation at break. One of the option for improvement is through blending with polyoxymethylene (POM). Melt blending of polylactic acid (PLA) and polyoxymethylene (POM) was performed to investigate the effects of POM loadings on mechanical, morphology and thermal properties of PLA/POM blends. The PLA/POM blends was loaded with 1wt%, 3wt% and 5wt% modified nano clay (C-20).The mechanical properties of the blends were assessed by means of universal testing machine while thermal properties were analysed using differential scanning calorimetry (DSC). Scanning electron microscope was used to study the dispersion and particles size of POM in PLA also C-20 in PLA matrix. The results show, the tensile strength, young’s modulus and elongation at break PLA/POM increased with increasing ratio of clay (C-20). It was found out, the incorporation C-20 is expected increased the tensile strength of the PLA/POM blends. | |
| 610 | 2 | 0 |
_aFaculty of Chemical & Natural Resources Engineering _xDissertations |
| 650 | 0 |
_aUniversities and Colleges _xDissertations |
|
| 650 | 0 | _aTheses | |
| 999 |
_aVIRTUA40 _c7363 _d7369 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2640*2641*3000*3360*3361*3370*3371*3380*3381*3470*5000*5020*5040*5200*6100*6500*6501*9992 | ||