000 02194nam a2200277 a 4500
001 vtls000102349
003 KUKTEM
005 20251117113353.0
008 171102t2017 my a f a m 000 0 eng d
020 _aTHE0000223(Local)
039 9 _a201905141446
_bnazirah
_y201711021006
_zfateeha
040 _aUMP
090 _aFIST .Z84 2017 r Bc.
100 0 _aSiti Zuhairah Zahari
245 1 0 _aPhysical and structural properties of nickel zinc ferrite Ni 1-x Zn x Fe 2O 4 (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) /
_cSiti Zuhairah Zahari
260 _aKuantan, Pahang :
_bUMP,
_c2017
300 _axii, 38 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 CD-ROM
500 _aFaculty of Industrial Sciences and Technology
502 _aProject Paper (Bachelor of Applied Science (Honor) Material Technology) -- Universiti Malaysia Pahang – 2017
504 _aBibliography : p. 37-38
520 3 _aSolid state or conventional technique is one of favorite or famous technique that used to prepared ferrite by the researchers a few decades ago. In this study, the variation of composition in preparation of Ni-Zn ferrites. The composition series Ni (1-x)Zn (x)Fe 2O 4 where (x= 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) of ferrites have been prepared using this method. The samples were prepared by double sintering. The structural, or crystallization and physical properties were studied by X-ray diffraction; Scanning electron microscope and Fourier transform infrared spectrometry. The pattern of XRD revealed a single phase cubic spinel structure for the all composition ferrites samples. The crystalline size showed the increased and decreased result which are x=0.0 to x=0.4 increased but for x=0.6 it show decreased and increased for the last two samples x=0.8 and x=1.0. The lattice parameter or constant was also investigated and from this studies, it is observed that the lattice parameter majority increased with increased the zinc content.
610 2 0 _aFaculty of Industrial Sciences and Technology
_xDissertations
650 0 _aUniversities and Colleges
_xDissertations
650 0 _aTheses
999 _aVIRTUA40
_c7492
_d7498
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5000*5020*5040*5200*6100*6500*6501*9992