000 03838ntm a2200373 i 4500
001 vtls000102924
003 KUKTEM
005 20251117113357.0
008 180205s2017 my a f am 000 0 eng d
020 _aTHE0001037(Local)
039 9 _a201905171303
_bnazirah
_c201802201117
_dsaini
_c201802051241
_dsaini
_c201802051120
_dsaini
_y201802051116
_zsaini
040 _aUMP
_beng
_cUMP
_erda
090 _aFKKSA .T49 2017 r Bc.
100 1 _aThye, Mei Chin,
_eauthor.
245 1 4 _aThe potential of food waste as an energy source /
_cThye Mei Chin A/P Thye Ah Chai
264 1 _aKuantan, Pahang :
_bUMP,
_c2017
264 4 _c© 2017
300 _axiv, 54 pages :
_billustrations (some color) ;
_c30 cm. +
_e1 CD-ROM
336 _atext
_2rdacontent
336 _atext
_2rdacontent
337 _aunmediated
_2rdamedia
337 _acomputer
_2rdamedia
338 _avolume
_2rdacarrier
338 _acomputer disc
_2rdacarrier
347 _atext file
_bPDF
_2rda
500 _aFaculty of Chemical & Natural Resources Engineering
502 _aProject Paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang – 2017
504 _aIncludes bibliographical references
520 3 _aMalaysia is overdependence on fossil fuels as the primary source of energy. The issues related to environmental effects and energy security has driven the nation towards renewable energy, specifically biomass. In this case, food waste (FW) represents a significant and largely underutilized fraction of municipal solid waste (MSW) in Malaysia. MSW generated daily in Malaysia range from 0.8 to 0.9 kg per household in general and about 1.62 kg per household in densely populated cities such as Kuala Lumpur with FW constituting approximately 60 % of the total solid waste (Saeed et al., 2009; Kathrivale et al., 2003). Improper management of these MSWs can cause large scale contamination of soil, water and air, contributes to greenhouse gas emissions and allow huge potential economic values uncaptured. Therefore, this work is trying its best to evaluate the feasibility of food waste as a potential source of energy through torrefaction process by manipulating temperature, residence time and particle size. This process is carried out at temperatures ranging from 280°C to 320°C, under an inert atmosphere (Deng et al., 2009). In this study, torrefaction of FW was conducted in a tubular vertical reactor by flowing the nitrogen gas through the reactor to ensure an inert atmosphere. The effects of various torrefaction temperature (280ºC, 300ºC and 320ºC), residence time (15 mins, 30 mins and 60 mins) as well as particle size distribution (0.5 mm, 1 mm and >1 mm) on the proximate analysis, ultimate analysis, calorific value, mass yield and higher heating value of raw FW and torrefied FW were investigated. From the results obtain, it is found out that temperature shows the most significant effect on the treated sample. Therefore, the optimum condition for torrefaction of FW is 320 °C, 60 minutes and 0.5 mm that yield the best performance by having highest fixed carbon content of 20.46 wt %, lowest hydrogen and oxygen content of 6.29 wt % and 19.13 wt % respectively. In term of calorific value, torrefied FW possess 6252.82 kJ/kg with the lowest mass yield. The energy resulted from higher heating value is 24.45 MJ/kg. As a conclusion, a dry and blackened solid product known as biochar is obtained, which has comparable fuel properties like coal and able to be used as a fuel for co-firing applications.
610 2 0 _aFaculty of Chemical & Natural Resources Engineering
_xDissertations
650 0 _aUniversities and Colleges
_xDissertations
650 0 _aTheses
999 _aVIRTUA40
_c7628
_d7634
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2640*2641*3000*3360*3361*3370*3371*3380*3381*3470*5000*5020*5040*5200*6100*6500*6501*9992