000 02173nam a2200253 a 4500
001 vtls000031330
003 KUKTEM
005 20251114204352.0
008 080829t2008 my a f m 000 0 eng|d
020 _aTHE0004816(Local)
039 9 _a201905151546
_bsmfh
_c201302011509
_dhuda
_c201204191416
_dFida
_c201107132226
_dVLOAD
_y200808291513
_zida84
040 _aUMP
090 _aTP684.P3 J63 2008 rs Thesis
100 0 _aJoannes Victor Valentine @ Dol
245 1 0 _aTreatment of POME via chitosan based flocculation :
_bstudy the effect of dosage chitosan in removal oil from POME /
_cJoannes Victor Valentine @ Dol
260 _aKuantan, Pahang :
_bUMP,
_c2008
300 _a35 p. :
_bill. ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang - 2008
520 3 _aThe treatments of palm oil mill effluent (POME) have been a topic of research in Malaysia. These effluents needs to be properly treated before it released to watercourse and minimize the environmental hazard. This research is conducted to evaluate the treatment of palm oil mill effluent (POME) using chitosan based flocculation. Chitosan is a biological product which was believes it is useful in water treatment as adsorbent to remove oil from wastewater. A study was conducted in the laboratory to compare chitosan concentration in different volume of dosage. The sample were undergo flocculation process by using Jar Test where six beaker of sample was treated with varies volume dosage. The comparison was made by analyzing their oil removal efficiency, reduction of suspended solid, turbidity, BOD and COD and as well as pH adjustment. The result indicated that chitosan concentration at ratio of 1wt% chitosan in 1% was performed better in increasing of volume doses and 2%wt chitosan in 7% acetic acid was better at optimum dosage more than 12ml. In conclusion, it shows that chitosan was effective in removal oil from POME with more than 90% efficiency.-Author
650 0 _aPalm oil
650 0 _aChitosan
650 0 _aFlocculation
999 _aVIRTUA40
_c828
_d834
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5200*6500*6501*6502*9992