000 04393ntm a2200373 i 4500
999 _c94345
_d94351
003 MY-KuUP
005 20251125105735.0
006 t||||fr|||| 000 0
007 ta
008 201015t2 2 M a|||fram|| 000 0 eng d
020 _aTHE0008910(Local)
_qhardback
040 _aUMP
_beng
_cUMP
_erda
090 _aFTKA .T36 2019 r Thesis
100 1 _aTan, Sze Pei,
_eauthor.
245 1 0 _aNumerical study of crashworthiness on honeycomb filler subjected to impact loading /
_cTan Sze Pei
264 1 _aKuantan, Pahang :
_bUMP,
_c2019
264 4 _c© 2019
300 _axiii, 103 pages :
_billustrations (some color) ;
_c30 cm. +
_e1 CD-ROM
336 _atext
_2rdacontent
336 _atext
_2rdacontent
337 _aunmediated
_2rdamedia
337 _acomputer
_2rdamedia
338 _avolume
_2rdacarrier
338 _acomputer disc
_2rdacarrier
347 _atext file
_bPDF
_2rda
500 _aFaculty of Engineering Technology
502 _aThesis (Master of Science) -- Universiti Malaysia Pahang – 2019
504 _aIncludes bibliographical references
520 3 _aHoneycomb filler is known as a good filler for energy absorbing devices in car. Many types of research about honeycomb filler under axial impact had been done and proposed in the literature. However, when it comes to the real situation in an accident, a collision is not only coming from a frontal impact (axial loading). A collision might also come from a different angle (oblique loading). Therefore, crashworthiness in several impact angles are important concern in designing a safe vehicle. The crashworthiness criteria, namely energy absorption (EA) and specific energy absorption (SEA) are related to loading parameters. Safety is the main concern in designing an energy absorber. However, reducing the extra weight caused by the energy absorber is also one of the concerns for manufacturers. This is because the lighter the weight the vehicle has the lesser fuel is consumed to be eco-friendly. In this study, the main objective is to study the performance of honeycomb fillers by different cross-sectional design versus thickness subjected to different angles of impact loading. The investigation is carried out by Finite Element (FE) simulation using ABAQUS software. The investigations of all FE models are carried out by the dynamic impact test. Numerical investigation studies the reaction of three types of honeycomb filler geometric designs which are circular honeycomb filler, hexagon honeycomb filler and multicell. The diameter of every single cell for honeycomb filler is fixed at 10.4 mm. Three different thicknesses of every cell are investigated which are t = 0.06 mm, 0.12 mm, and 0.18 mm. All models are carried out by dynamic impact with both axial and oblique loading which 𝜃 = 0°, 10°, 20°, and 30°. The material assigned to all models is aluminium alloy AA6060-T4. According to simulation result in this study, hexagon honeycomb filler is the best structural design. The result of EA, SEA, and CFE of hexagon honeycomb filler is 120 % higher than circular honeycomb filler and 230 % higher than multicell filler. The crashworthiness is influenced by the thickness of honeycomb filler, the thickness of honeycomb filler increased, then crashworthiness criteria performance increased. When thickness increased from 0.06 mm to 0.12 mm, the EA and CFE increased by approximately 290 % and SEA increased by approximately 150 %. When thickness increased from 0.12 mm to 0.18 mm, the EA, SEA, and CFE increased by approximately 170 %, 120 % and 190 %, respectively. When thickness increased from 0.06 mm to 0.18 mm, the EA, SEA, and CFE increased by approximately 500 %, 170 %, and 550 %, respectively. The increment is much higher than the aspect ratio of thickness of 200 %, 150 %, and 300 % respect to 0.06 mm to 0.12 mm, 0.12 mm to 0.18 mm, and 0.06 mm to 0.18 mm. Lastly, the axial loading and oblique loading of honeycomb fillers with angles, 𝜃 = 0° - 30° are studied. Results showed that the performance of EA and SEA decreased when angles, 𝜃 increased. In conclusion, the overall result showed that hexagon honeycomb filler is the best model in terms of geometry, thickness, and angle of loading.
610 2 0 _aFaculty of Engineering Technology
_xDissertations
650 0 _aUniversities and colleges
_xDissertations
650 0 _aTheses
942 _2lcc
_cTHESIS