000			04416ntm a2200361 i 4500
999			_c97092 _d97098
003			MY-KuUP
005			20251125110040.0
006			t||||fr|||| 000 0
008			220426s2021 my a|||frm||| 000 0 eng d
020			_aTHE0009343(Local) _qhardback
040			_aUMP _beng _cUMP _erda
090			_aFTKKP .S23 2021 r Thesis
100	1		_aSaad Mohsin Abed, _eauthor.
245	1	0	_aSynthesis and characterization of a corn oil based demulsifier for crude oil emulsion / _cSaad Mohsin Abed
264		1	_aKuantan, Pahang : _bUMP ; _c2021
264		4	_c© 2021
300			_axvi, 131 pages : _billustrations (some color) ; _c30 cm. + _e1 CD-ROM
336			_atext _2rdacontent
336			_atext _2rdacontent
337			_aunmediated _2rdamedia
337			_acomputer _2rdamedia
338			_avolume _2rdacarrier
338			_acomputer disc _2rdacarrier
347			_atext file _bPDF _2rda
500			_aFaculty of Chemical and Process Engineering Technology
502			_aThesis (Doctor of Philosophy) -- Universiti Malaysia Pahang – 2021
504			_aIncludes bibliographical references
520	3		_aWater in oil emulsion occurs at many stages in the production and treatment of crude oil. The presence of water causes several operational problems like corrosion in equipment and pipelines. It is also an environmental/health threat, can interfere with refining operations, and generally increases the cost of oil production. Therefore, for economic, environmental, and operational reasons, it is essential to separate the water from the oil before transporting or refining the latter. The most effective method for overcoming this problem is to demulsify the crude using chemical demulsifiers through the synthesis of a demulsifier. Some gaps remain through this process, including that chemical demulsifiers, though effective, are mostly petroleum-based and refractory organic polymers. They often subject the ambient ecosystem to more hazardous risks and use highly complicated preparation methods, greatly limiting their applications. No study has yet been conducted using a new mix design to identify the significant and optimum values of the variables which affect the synthesis of a demulsifier. The aim of this research was to synthesise a demulsifier for crude oil emulsion using materials based on natural products and by applying the design of experiments method. A corn oil–based demulsifier was successfully synthesised through the condensation reaction of corn oil with diethanolamine in the presence of a catalyst applied during separation via a water-in-oil (W/O) emulsion using response surface methodology (RSM). The significant parameters of synthesis, identified through design of experiments, included a temperature of 180 °C, a time of two hours, a 2.5% catalyst, and diethanolamine to corn oil (D/C) 1/3, v/v. The demulsifier was characterised by FTIR, GC-MS, NMR, LC-QTOF-MS, and IFT analyses. The surfactant’s separation efficacy was studied using the Sany-glass test. The results showed that the new product efficiently demulsified the W/O emulsion, with 98% separation achieved. The influence of the settling time, demulsifier dosage, temperature, and pH on the demulsification efficiency were investigated. The separation efficiency increased with increases in the settling time, demulsifier dose, and pH, while the temperature conditions accelerated the demulsification process. The interfacial tension decreased with an increased dosage of the demulsifier, and the central composite design (CCD) of the response surface methodology (RSM) was employed during the optimisation demulsification process. The optimisation process was performed using four factors (water content, demulsifier dosage, temperature, and pH). The optimum conditions for demulsification were achieved at water content 40%, dosage 3500 ppm, temperature 60 ºC, and pH 8. Finally, the validation of the results showed good agreement with the experimental data, while the new demulsifier demonstrated excellent performance and was deemed promising for demulsifying W/O emulsions.
610	2	0	_aFaculty of Chemical and Process Engineering Technology _xDissertations
650		0	_aUniversities and colleges _xDissertations
650		0	_aTheses
942			_2lcc _cTHESIS