000 02707nam a2200253 a 4500
001 vtls000037829
003 KUKTEM
005 20251114204358.0
008 090615t2008 my a f m 000 0 eng d
020 _aTHE0006972(Local)
039 9 _a201906131303
_baida
_c201412220953
_dariffin
_c201107132243
_dVLOAD
_c200908141630
_dVLOAD
_y200906151235
_zkam
040 _aUMP
090 _aTK7872.P76 A97 2008 rs Bc.
100 0 _aMohd Azri Abd Mutalib
245 1 0 _aSpeed control of DC motor using PI controller /
_cMohs Azri Bin Abd Mutalib
246 3 _aSpeed control of DC motor using PI controller
_h[electronic resource]
260 _aKuantan, Pahang :
_bUMP,
_c2008
300 _a74 p. :
_bill. (some. col.) ;
_c30 cm. +
_e1 computer disc
502 _aProject paper (Bachelor of Electrical Engineering (Electronic)) -- Universiti Malaysia Pahang - 2008
520 3 _aThe development of technologies affects the demands of industries at the present time. Thus, automatic control has played a vital role in the advance of engineering and science. In today’s industries, control of DC motors is a common practice. Therefore, implementation of DC motor controller is required. There are many types of controller that can be used to implement the elegant and effective output. One of them is by using a PI controller. PI stands for Proportional and Integral Controllers which are designed to eliminate the need for continuous operator attention thus provide automatic control to the system. Cruise control in a car and a house thermostat are common examples of how controllers are used to automatically adjust some variable to hold the measurement (or process variable) at the set-point. This project is focusing on implementing PI controller to control speed of a dc motor. The overall project is divided into two parts. The first part is concern on the simulation using MATLAB simulink where the dc motor is modeled and PI controller is tuned using Ziegler-Nichols rules and software tuning. The second part is implementing the simulation. This part is divided into another two parts, Graphical User Interface (GUI) development and hardware interfacing. GUI is built using National Instrument LabVIEW software with implementation of PI controller. An oscilloscope also had been build there. Hardware interfacing part is built with Mitsumi dc mini-motors, M31E-1 Series, speed sensor and analog to digital converter, DAC8032. As the result, PI controller is capable to control the speed of dc motor followed the result from simulation.
650 0 _aProgrammable controllers
650 0 _aIntegrated circuits
999 _aVIRTUA40
_c988
_d994
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5200*6500*6501*9992